769323
6
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
6 D-307500 PowerMaster 360 Installer's Guide
1. Introduction
The PowerMaster-360 security and smart home platform is a comprehensive security system based on the
PowerMaster security logic and PowerG proven RF security technology with IP communication. The PowerMaster-
360 platform has dual path configuration: IP via Ethernet to the customer-premises gateway and cellular modem (2G or
3G). The reporting is done through IP as primary and cellular modem as secondary. Property owners receive
notifications of events by email and/or SMS. In addition, the system includes a Wi-Fi module that supports IP cameras
and a Z-Wave controller that supports Z-Wave devices.
The PowerMaster-360 security system is fully controllable from a computer, and accessible to home and property
owners through their mobile devices. Installers program and configure the system remotely through the computer and
mobile application’s Virtual Keypad (see APPENDIX A / B).
This manual refers to PowerMaster-360 v18 and above. The most updated manuals can be downloaded from the
Visonic Web site http://www.visonic.com.
The PowerMaster-360 control panel is supplied with 2 instruction manuals:
Installer's Guide (this manual) – for use of system installer during system installation and configuration.
User’s Guide – also for use of system installer during system installation and configuration, but also for the master
user of the system, once installation is completed. Hand over this manual to the master user of the system.
1.1 System Features
The following table lists the PowerMaster-360 features with a description of each feature and how to use it.
Feature
Description
How to configure and use
Visual alarm
verification
When used with Next CAM PG2 PIR-camera
detector or TOWER CAM PG2, and GPRS or
Ethernet communication, the PowerMaster-
360 is able to provide the Monitoring Station
with clips captured in alarm situations. The
system sends the clips to the Monitoring
Station automatically for burglary alarms and,
depending on setup, also for fire and
personal emergency alarms.
1. Setup GPRS communication: see GSM
Module Installation (section 3.4).
2. Configure camera settings: refer to the
Next CAM PG2 Installation Instructions.
3. Enable fire and personal alarm
verification: see section 4.6.5 Configuring
Motion Cameras for Video Alarm Verification.
On demand clips from
cameras
The PowerMaster-360 can provide images
from the Next CAM PG2 or TOWER CAM
PG2 by demand from a remote
PowerManage server. Pictures are taken
based on a command from the monitoring
station via the Visonic-Go application. To
protect customers' privacy, the system can
be customized to enable the On Demand
View only during specific system modes (i.e.
Disarm, Home & Away) and also to a specific
time window following an alarm event.
1. Setup the On demand feature: see
section 4.6.5 Configuring Motion Cameras
for Video Alarm Verification.
2. To request and view images: refer to the
PowerManage User's Guide, Chapter 5
Viewing and Handling Events.
Easy enrollment
PowerG devices are enrolled from the control
panel’s Virtual Keypad. Pre-enrollment can
also be performed by entering the PowerG
device ID number and then activating the
device in the vicinity of the panel.
To enroll or pre-enroll devices: see section
4.4.2 Adding New Wireless Devices.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Visonic Powermaster-360 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Visonic Powermaster-360 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info