769323
4
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
4 D-307500 PowerMaster 360 Installer's Guide
4.6.6 Configuring motion cameras for visual alarm verification
In previous versions, changing the VIEW ON DEMAND setting configured all enrolled motion cameras at once. From
PowerMaster v20.2 and later, you can configure each motion camera individually to the required viewing setting.
From PowerMaster v20.2 onwards, the location for VIEW ON DEMAND has changed:
Version 19.4 or earlier:
INSTALLER  04:COMMUNICATION  5:MOTION CAMERAS 
VIEW ON DEMAND
Version 20.2 or later:
INSTALLER 02:ZONES/DEVICES  MOTION SENSORS
DEV SETTINGS VIEW ON DEMAND
Option
Configuration Instructions
VIEW ON DEMAND
The VIEW ON DEMAND configuration determines in which arming modes the feature is
enabled.
Options: disabled (default); in all modes; in AWAY only; in HOME only; in HOME & AWAY;
DISARM & AWAY; DISARM & HOME; and in DISARM only.
Note: Other configurations related to this feature, such as VIEW TIME WINDOW, UPLOAD FILM and KIDS COME
HOME are unchanged.
4.7.2 PGM output configuration
From PowerMaster v20.2 onwards it is possible to:
(1) You can activate a PGM output for up to six sensors (zones). See PGM: BY SENSOR for more details.
(2) You can activate a PGM output in response to temperature, presence, and light sensor signals. See PGM: BY
SENSOR for more details.
(3) You can program an output using both wired and wireless sirens and strobes. See PGM: BY OTHER for more
details.
Option
Configuration Instructions
PGM:BY SENSOR
Zone A Z:_ _
Zone B Z:_ _
Zone C Z:_ _
Zone D Z:_ _
Zone E Z:_ _
Zone F Z:_ _
You can trigger a PGM output when any of the six available sensors activate.
The output triggers when the system is either armed or disarmed.
To configure and PGM output, complete the following steps:
Press to enter the PGM: BY SENSOR sub menu and then select the zone you wish to
program, for example Zone A. If the zone was configured before, the display shows the current
zone number (Z:xx) and if not, the zone number is blank (Z:_ _).
To configure the zone number, press . Enter the two digit zone number that you wish to
activate the PGM output for and press to confirm.
Select ZONE ACTIVITY to define which activity in the selected zone will trigger the PGM.
Options: Open/Violate (default); Close; Presence; No Presence; Light ON; Light OFF;
Very HOT; Very HOT RSTR; Cold; Cold RSTR; Freezing; Freezing RSTR; Freezer;
Freezer RSTR
Select PGM ACTION to define the PGM behavior.
Note: If you select toggle, the PGM output turns on when an event occurs in any of these
zones and is turned off when the next event occurs, alternately.
Note: If the zone number needs to be updated for an existing PGM configuration, the PGM
action must be changed for the update to take effect. In order to do this, change the PGM
action to a temporary value and then return to the menu to change it back to the required
action.
To add another sensor, select another zone (Zone B to Zone F,) and repeat the above
process.
When the procedure is complete, press to return to the home screen.
Note: After you exit from the installer mode, all PGM outputs are turned off
Options: disabled (default); turn ON; turn OFF; activate PULSE; toggle
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Visonic Powermaster-360 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Visonic Powermaster-360 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info