667318
48
Verklein
Vergroot
Pagina terug
1/234
Pagina verder
0478 111 9925 B - EN
46
11.3 Engine
Maintenance interval:
See engine instruction manual
To achieve a long service life, it is always
particularly important to maintain a
sufficient level of oil and to change the oil
and air filter regularly, as well as to
observe the recommended oil change
intervals.
Information regarding engine oil and oil
capacity can also be found in the engine
instruction manual.
The cooling ribs must always be kept clean
to ensure that the engine is adequately
cooled.
11.4 Gearbox
MB 756.0 YS, MB 756.0 YC:
Maintenance interval:
Every 1000 operating hours/
at least once a year
The hydrostatic gearbox must only be
maintained by trained personnel. VIKING
recommends VIKING specialist dealers.
MB 756.0 GS:
The 3-speed gearbox is maintenance-free.
11.5 Blade brake clutch maintenance
Maintenance interval:
Once a year
The blade brake clutch is subject to natural
wear.
It may only be maintained by trained
personnel. VIKING recommends VIKING
specialist dealers.
11.6 Checking blade wear
Maintenance interval:
Before each use
Checking procedure
Place the machine in the cleaning
position. (Ö 11.1)
Clean mowing blade (1) and check for
notches and cracks.
Use slide calliper (2) to measure the
blade thickness A at several points.
Measure the blade width as illustrated
at the points B and C on the left and
right of the blade.
Wear limits:
The blade thickness A must be at least
2,5 mm at any point.
The blade width must be at least 80 mm at
point B and at least 55 mm at point C.
Different wear limits apply if e.g. the
mulching blade available as a special
accessory is installed in the lawn mower
instead of the supplied mowing blade.
11.7 Removing and installing the
mowing blade
Removing
Place the machine in the cleaning
position. (Ö 11.1)
Hold mowing blade (1) and loosen
blade fastening screw (2).
Remove blade fastening screw (2),
retaining washer (3) and mowing
blade (1).
Assembly
Clean the blade contact surface and
blade holder.
Secure the blade fastening screw with
Loctite 243.
Place mowing blade (1) on blade
holder (4) as illustrated.
Position retaining washer (3) as
illustrated and tighten with blade
fastening screw (2) to 60 - 65 Nm.
Risk of injury!
Blades are subjected to differing
degrees of wear depending on the
location and duration of use. If you
use the machine on sandy ground
or use it frequently under dry
conditions, the blade will be
subjected to greater loads and will
wear more quickly than the
average.
A worn blade may break off and
cause serious injuries. The
instructions for blade maintenance
must therefore always be
observed.
Risk of injury!
Observe the safety instructions in
the "For your safety" section.
(Ö 4.7)
20
Risk of injury!
Always wear gloves.
Avoid damage to the machine!
The mowing blade must be
replaced if notches or cracks are
detected or if a wear limit is
reached (Ö 11.6).
21
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viking MB 756 YS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viking MB 756 YS in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 13,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info