667318
43
Verklein
Vergroot
Pagina terug
1/234
Pagina verder
41
DEFRNLITESPTPLHURU EN
0478 111 9925 B - EN
Place the machine on level and firm
ground when performing all the
operations described.
7.1 Assembling the handlebar
MB 756.0 YC:
1 Remove screw (1) with
washer (2). Loosen screws (3).
2 Push handlebar (4) into handlebar
attachment (5) and fold up until the slot
in the handlebar is above the bore in the
housing, making sure that the cables
are lying correctly (see illustration).
3 Install screw (1) with washer (2),
making sure that the screw also
extends into guard plate (6).
4 Tighten screws (3) to 21 - 29 Nm.
Set the handlebar to the desired
working height and hold, tighten
screw (1).
Check correct assembly:
The handlebar must be firmly located
with the cables to the rear and outside
of the handlebar.
MB 756.0 GS, MB 756.0 YS:
1 Guide upper handlebar (1)
with the open ends into lower
handlebars (2) and hold. Insert
bolts (G) from the outside inwards
through the bores, fit lock nuts (H) and
tighten to 19 - 27 Nm.
2 Set the handlebar to the desired
working height and hold, tighten
screw (3).
Check correct assembly:
The upper handlebar must be firmly
connected to the lower handlebar with
the cables to the rear and outside of the
handlebar.
7.2 Installing protective sleeve
Insert all cables in protective
sleeve (F).
Guide cable tie (E) through the top
opening in right lower handlebar (1) and
use to fasten protective sleeve (F).
Fasten protective sleeve (F) to right
upper handlebar with cable tie (E) as
shown.
7.3 Single-wheel cutting height
adjustment
The cutting height can be adjusted
to six different positions at each wheel
using a corresponding lever.
Lowest cutting height (1): 25 mm
Highest cutting height (6): 90 mm
Setting the cutting height:
Push lever (1) towards the wheel, set to
the desired position and allow to
engage in the corresponding notch.
Stop position
Start the engine, engage the mowing
blade.
Disengage the mowing blade.
Switch on self-propulsion.
6. Standard equipment
Item Designation Qty.
A Basic unit with handlebar 1
B Grass catcher bag frame 1
C Grass catcher bag fabric 1
D Grass catcher bag flap 1
E Cable tie 2
F Protective sleeve 1
Instruction manual 1
2
Engine instruction manual 1
MB 756.0 GS, MB 756.0 YS:
G Flat head bolt 4
H Lock nut 4
7. Preparing the machine for
operation
Risk of injury:
Observe the safety instructions in
the section "For your safety" (Ö 4.).
Item Designation Qty.
3
4
5
6
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viking MB 756 YS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viking MB 756 YS in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 13,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info