667349
46
Verklein
Vergroot
Pagina terug
1/548
Pagina verder
0478 201 9906 D - EN
44
1 Reversible blades
On the blades, measure the
distance (A) between the bore and the
edge of the blade at several points.
Minimum distance:
A=6mm
2 Wing blade
Measure the blade width (B) at the
upward-pointing curved edge of the
wing blade.
Minimum blade width:
B=15mm
3 Wing blade (GE 250, GE 260)
Measure the blade width (C) at the
upward-pointing curved edge of the
wing blade.
Minimum blade width:
C=19mm
4 Shredding blade (GE 250, GE 260)
Measure the blade width (D) at the
upward-pointing curved edge of the
shredding blade.
Minimum blade width:
D=13mm
11.8 Reversing the blades
Remove the blade set. (Ö 11.5)
Unscrew screws (1) and remove
together with nuts (2).
Remove blade (3) upwards.
Clean the blade disc.
Reverse blade (3) and place onto the
blade disc with the sharp edge exposed
and align the bores.
Insert screws (1) through the bores and
screw on nuts (2). Tighten the nuts (2)
to 10 Nm.
Install the blade set. (Ö 11.6)
Sharpening the blades:
Blades which are blunt on both sides must
be sharpened before resuming work.
In order to ensure optimum machine
operation, the blades should only be
sharpened by a technician. VIKING
recommends VIKING specialist dealers.
Remove the blades for sharpening.
Cool the blades when sharpening,
e.g. with water. The blade must not be
allowed to display blue colouring, as
this would reduce its cutting quality.
Sharpen the blade evenly to prevent
vibrations due to imbalance.
Check blades for damage before
installing: The blades must be replaced
if notches or cracks are visible or if the
blades have reached the wear limits.
Sharpen blades at a sharpening angle
of 30°.
Sharpen the blades against the cutting
edge.
After sharpening, remove any
sharpening burr at the cutting edge
using fine sandpaper.
Observe the tightening torques
contained in the "Reversing the blades"
section when installing the blades.
11.9 Electric motor and wheels
The electric motor is maintenance-free.
The wheel bearings are maintenance-free.
11.10 Storage and winter break
Store the garden shredder in a dry and
locked place that is generally free of dust.
Make sure that the machine is kept out of
the reach of children.
Only store the garden shredder in good
operating condition and with the feed
chute fitted.
Note the following points when storing the
garden shredder for extended periods
(over winter):
Thoroughly clean all external parts of
the machine.
Thoroughly lubricate/grease all moving
parts.
12.1 Pulling or pushing the
garden shredder
Hold the garden shredder at the
upper chute (1) and tilt to the rear.
The garden shredder can be pulled or
pushed slowly (walking pace).
Blunt reversible blades may only be
reversed once. Always reverse
both blades.
19
12. Transport
Risk of injury!
Before transporting, carefully read
and observe the section "For your
safety", in particular the
"Transporting the machine" section.
(Ö 4.4)
20
46

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Viking-GE-150

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viking GE 150 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viking GE 150 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 18,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info