13
If the wireless connection between the
Vitotrol 100 and the wireless receiver is
faulty, change the address code.
1.
Press and hold B on the wireless
receiver (see diagram on page 11) for
approx. 10 s until LED
r
flashes.
2. Carry out the following settings on
the Vitotrol 100:
Operating instructions
Open the flap of the Vitotrol 100.
3. Press twice.
4. Select "Settings" with / .
5. Confirm with OK.
6. Select "Service" with / .
7. Press OK three times to confirm.
8. Select "Address code" with / .
9. Confirm with OK.
After approx. 30 s the display shows
"Transmitting".
The transfer takes approx. 30 s.
During the transfer, LED flashes
briefly.
Once the address code is recognised,
the LEDs go out; otherwise repeat the
procedure.
Service settings
Changing the address code
5457 286 GB
Service