785222
33
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
Contactor failure - Red LED flashing 10 times every 4 seconds
Hardware error - GX device alarm Calibration lost - GX device alarm
10.2. Lynx Smart BMS operational issues
High discharge current
A high current alarm is given when the current is more than 600A for more than 5 minutes. The red LED flashing 8 times every 4
seconds. Reduce the loads connected to the Lynx Smart BMS so that the current through the Lynx Smart BMS will be below
500A.
High charge current
A high current alarm is giving when the current is more than 600A for more than 5 minutes. The red LED flashing 8 times every 4
seconds. Turn chargers off so that the current through the Lynx Smart BMS will be below 500A.
Contactor (relay) issues
The Lynx Smart BMS is equipped with 3 protections:
Over current protection: An alarm is generated when the current exceeds 600A for 5 minutes.
Contactor voltage monitoring: An alarm is generated when the voltage over the contactor is higher than 0,5V. A high voltage
indicates high resistance and high power dissipation indicating a bad contactor.
Electrical/mechanical protection: There are 2 thermal switches mounted on the busbar. The contactor opens and an alarm is
generated when the temperature of the busbars becomes higher than 130°C.
High BMS temperature
Check ambient temperature and check if the fans are running. Reduce the ambient temperature.
Settings invalid
Settings data is corrupt, reset to factory defaults.
10.3. BMS issues
10.3.1. The BMS frequently disables the battery charger
A well-balanced battery does not disable the charger, even when the batteries are fully charged. But when the BMS frequently
disables the charger, this is an indication of cell imbalance.
In case of moderate or large cell imbalance it is an expected behaviour that BMS frequently disables the battery charger. This is
the mechanism behind this behaviour:
As soon as one cell reaches 3.75V the BMS disables the charger. Whilst the charger is disabled the cell balancing process still
continues, moving energy from the highest cell into adjacent cells. The highest cell voltage will drop, and once it has fallen below
3.6V the charger will be enabled again. This cycling typically takes between one and three minutes. The voltage of the highest
cell will rise again quickly (this can be in a matter of seconds) after which, the charger will be disabled again, and so forth. This
does not indicate a problem with the battery or the cells. It will continue with this behaviour until all cells are fully charged and
balanced. This process might take several hours. It depends on the level of imbalance. In case of serious imbalance this process
can take up to 12 hours. Balancing will continue throughout this process and balancing even takes place when the charger is
disabled. The continued enabling and disabling of the charger can appear strange but rest assured that there is no problem. The
BMS is merely protecting the cells from over voltage.
10.3.2. The BMS is prematurely turning chargers off
This could be because of a cell imbalance. One cell in the battery has a cell voltage above 3.75V. Check the cell voltages of all
the batteries that are connected to the BMS.
10.3.3. The BMS is prematurely turning loads off
This could be because of a cell imbalance.
If a cell has a cell voltage below the "Allowed to Discharge" setting in the battery the BMS will turn the load off. The "Allowed to
Discharge" level can be set between 2.6V and 2.8V. The default is 2.8V.
Check the cell voltages of all the batteries that are connected to the BMS using the VictronConnect app. Also check if all batteries
have the same "Allowed to Discharge" settings.
Once the loads have been turned off due to low cell voltage, the cell voltage of all cells needs to be 3.2V or higher before the
BMS will turn the loads back on.
Lynx Smart BMS
Page 30 Troubleshooting and Support
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Victron Lynx Smart BMS 500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Victron Lynx Smart BMS 500 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info