5. Remove folding pipe and floor nozzle
a) To disconnect the intake manifold from the motor unit, press the upper
release button (4).
b) To remove the floor nozzle from the suction pipe, press the lower unlocking
button (6).
6. Mount the 2 in 1 nozzle on the device
a) Cyclone vacuum cleaner as a
Hand vacuum cleaner
use: 2-in-1 nozzle directly into
the connection opening of the
motor unit. Mount the 2-in-1 nozzle on the device until it clicks in.
b) Use a 2-in-1 nozzle with a suction pipe. Insert the nozzle into the lower
opening of the suction piper until it clicks into place. This variant is ideal for
vacuuming ceilings or narrow stairs.
To remove, press the release button and remove the nozzle.
CHARGE THE BATTERY
STEP 1
Use only the supplied AC adapter as a charger for the battery. Hang the assembled
vacuum cleaner on the wall mounting, the battery is in the motor unit.
STEP 2
Insert the charger plug into the device socket. Insert the charger plug into an electrical
outlet. The top light of the battery indicator flashes during charging. Charge the battery
with the charger for 4 -5 hours before using the vacuum cleaner.
Warning: Always keep the battery and charger dry. For charging, the battery must
always be in the device, never removed.
STEP 3
As soon as four bars light up in the charging status display (9), the battery is fully
charged and the device can be put into operation.
ATTENTION:
Always fully charge the device before first using.
As the suction power drops, please clean the dust cup, cyclone insert, HEPA, and
sponge and charge the device.
IMPORTANT: PERIODIC CHARGING OF THE BATTERY
To prevent deep discharge, the battery must be charged every 3 months even
when not in use. Failure to follow this procedure will void the warranty on the battery.
Our technical service can determine whether a battery is deeply discharged.
