542653
7
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
6 7
Run 3.0 - OWNER’S MANUAL ENGLISH
P13 TARGET DISTANCE :
This program counts down the distance goal that the user
sets before exercising. After conrming the program, the
user enters the distance goal from 0.50 ~ 99.50 km/mile
by using the SPEED & ELVATION +/- keys. Increments are
0.5 kilometers or miles. Press Enter to conrm and then
press Start, the treadmill belt starts and the user controls
the speed and incline. The distance will count down in
the Distance display and until the goal has been reached,
“END” will appear on dot matrix and the treadmill will stop.
If the user doesn’t set any goal, it will perform the same
function as Manual program.
P14 TARGET CALORIES :
This program counts down the calorie goal that the user
sets before exercising. After conrming the program, the
user enters the calorie goal from 10 ~ 9990 kcal by using
the SPEED & ELVATION +/- keys. Increments are 10 kcal.
Press Enter to conrm and then press Start, the treadmill
starts and the user controls the speed and incline. The
calorie goal will count down in the Calories display and
until the goal has been reached, “END” will appear on
dot matrix and the treadmill will stop. If the user doesn’t
set any goal, it will perform the same function as Manual
program.
P15 TARGET TIME :
This program counts down the time goal that the user sets
before exercising. After conrming the program, the user
enters the time goal from 10:00 ~ 99:00 by using the SPEED
& ELVATION +/- keys. Increments are 10 minutes. Press
Enter to conrm and then press Start, the treadmill starts
and the user controls the speed and incline. The time
goal will count down in the Time display and until the goal
has been reached, “END” will appear on dot matrix and
the treadmill will stop. If the user doesn’t set any goal, it
will perform the same function as Manual program.
P16 TARGET ELEVATION GAIN :
This program counts down the elevation gain goal that
the user sets before exercising. After conrming the
program, the user enters the elevation gain goal from 10
~ 9990 meters by using the SPEED & ELVATION +/- keys,
the increments are 10 meters. Press Enter to conrm and
then press Start, the treadmill starts and the user controls
the speed and incline. The elevation gain goal will count
down in the Elevation Gain display and until the goal has
been reached, “END” will appear on dot matrix and the
treadmill will stop. If the user doesn’t set any goal, it will
perform the same function as Manual program.
NOTE: The machine will stop at the rst achieved
goal if more than one goal is set.
P17 HRC1 - WEIGHT LOSS PROGRAM (SPEED) :
The user must wear the heart rate chest strap or grip the
hand pulse sensor to use this program. After the program
is conrmed, the prompt text will show “INPUT AGE”,
Age display shows 40 as a preset age. Use the SPEED
& ELVATION +/- keys to input user’s age, press Enter to
conrm. Target heart rate (THR) is computed at 60% of
maximum (220 – AGE) and appears in the Pulse display.
It can be changed while using the SPEED & ELVATION
+/- keys, then presses Enter to conrm. Press Start and the
treadmill starts at 0.8KPH (0.5MPH) speed and 0% incline,
the user controls the incline. After three minutes of warm-
up, the speed will adjust at a rate of 1.0KPH/MPH every
40 seconds until the target heart rate zone is reached
(THR +/- 5BPM). The dot matrix shows “?” when there is
no heart rate input in 10 seconds, then shows “END” and
the treadmill stops when there is no heart rate input in 30
seconds.
P18 HRC2 - CARDIO HEART PROGRAM (INCLINE) :
The user must wear the heart rate chest strap or grip the
hand pulse sensor to use this program. After the program
is conrmed, the prompt text will show “INPUT AGE”,
Age display shows 40 as a preset age. Use the SPEED
& ELVATION +/- keys to input user’s age, press Enter to
conrm. Target heart rate (THR) is computed at 60% of
maximum (220 – AGE) and appears in the Pulse display.
It can be changed while using the SPEED & ELVATION
+/- keys, then presses Enter to conrm. Press Start and the
treadmill starts at 0.8KPH (0.5MPH) speed and 0% incline,
the user controls the speed. After three minutes of warm-
up, the incline will adjust at a rate of 1% every 30 seconds
until the target heart rate zone is reached (THR +/- 5BPM).
The dot matrix shows “?” when there is no heart rate input
in 10 seconds, then shows “END” and the treadmill stops
when there is no heart rate input in 30 seconds.
P19 HRC3 - INTERVAL FATBURN PROGRAM (SPEED &
ELEVATION) :
The user must wear the heart rate chest strap or grip the
hand pulse sensor to use this program. After the program
is conrmed, the prompt text will show “Input AGE”,
Age display shows 40 as a preset age. Use the SPEED
& ELVATION +/- keys to input user’s age, press Enter to
conrm. Target heart rate (THR) is computed at 60% of
maximum (220 – AGE) and appears in the Pulse display.
It can be changed while using the SPEED & ELVATION
120918_RUN 3.0_manual.indd 7 9/20/2012 5:09:37 PM
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tunturi Classic loopband RUN 3.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tunturi Classic loopband RUN 3.0 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Zweeds, Fins als bijlage per email.

De handleiding is 7,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info