484649
17
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
17
To prevent the battery from becoming totally discharged dur-
ing long periods of inactivity it must be disconnected and re-
charged before using again. Charge the caravan battery
before starting up.
It is extremely easy for you or your caravan dealer to perform
the checking and maintenance of your Mover® during the
annual inspection of your caravan. If in doubt, please contact
the Truma Services (see Truma Service Booklet or
www.truma.com).
Checks
Check the installation, wiring and connections for damage
at regular intervals. The drive units must be able to move
freely and be returned automatically to the safe idle position
when they are disengaged. If this is not the case, examine
drive units for soiling or corrosion at the guides and clean
if necessary. Undo all moving parts as required and oil or
spray with a lubricant such as WD40 to ensure that the
equipment moves correctly and provides the full range of
movement.
After the annual inspection, check whether all motors react
properly to the buttons on the remote control.
At least every 2 years, an expert must check the Mover®
for rust, check that detachable parts are firmly attached and
check that all safety-related parts are in good working order.
Emergency disengaging function
If the caravan battery has become so discharged that a disen-
gaging cannot be performed using electrical means, or a fault
has occurred, the drive motors can be disengaged manually.
Prise out the plastic cap (m) at the
rear end of the motor using a screw-
driver. Place the socket wrench
(size 7 mm – included in scope of
delivery) onto the hexagon bolt and
disengage the drive unit by turning
anticlockwise. Repeat the process
for all drive units.
m
Once the battery has been recharged the rollers can be
engaged again electrically.
Trouble-shooting
Check that the batteries in the remote handset are in
immaculate condition!
Check whether the caravan plug has been plugged into the
safety socket!
Check whether the caravan battery is in immaculate condition
and is fully charged! Please note that battery performance can
deteriorate considerably at cold ambient temperatures.
Check if the flat fuses (20 A) for the engagement motors are
OK. If the fuses are faulty, check for a short circuit in the con-
nection cables of the engagement motors, which are con-
nected to the control systems!
Perform a reset (approx. 10 seconds – briefly disconnect
battery or disconnect and reconnect safety plug)! Check again
that all the drive units are in the correct position.
If this does not solve the problem, please contact the Truma
Service.
Synchronising the electronic control unit with
the radio remote hand set
Remote control and control system (master) are synchro-
nised to each other ex works.
If the control unit or the remote hand set is replaced, they
must be re-synchronised as described below.
Check that the assembly has been carried out as specified
in the installation instructions and that the drive rollers have
no contact. Check that the battery is properly connected,
check the condition of the battery and that a voltage of 12 V
is present at the control unit. Please ensure that the caravan
plug has been plugged into the safety socket.
Press the reset button (k) on the control unit and hold down
(red LED – j – flashes slowly), and after approx. 5 seconds the
LED (j) starts to flash rapidly. Then release the reset button
and press and hold down the caravan reverse button on the
remote hand set (c) within 10 seconds, simultaneously switch-
ing on the remote hand set using the slide switch (a).
a
c
j
k
MASTER
The remote hand set and the control unit are synchronised to
each other. After successful synchronisation, the red LED
flashes rapidly.
Technical data
Operational voltage
12 V DC
Current consumption
average approx. 65 A maximum 150 A
Stand by consumption
< 2 mA
Remote hand set frequency
Class 1, 868 MHz
Speed
approx. 17 cm per second (depending on weight and incline)
Weight
approx. 66 kg
Fuse engagement motors
Blade fuse 20 A
Fuse in positive supply cable
150 A
Area of operation Mover® TE R4
Dual axle caravans with a total weight up to 3000 kg
Right to effect technical modifications reserved!
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Truma Mover Mover TE R4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Truma Mover Mover TE R4 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens als bijlage per email.

De handleiding is 12,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info