688812
14
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
14 EN
local air conditioner PAC 2010 E / PAC 2610 E
Night mode
The night mode can be activated when in cooling mode. Night
mode comes with the following settings:
After one hour the preset temperature is increased by 1°C.
After 2hours the preset temperature will again be
increased by 1°C. Then the temperature is kept constant.
Proceed as follows to activate night mode:
1. Select cooling mode.
2. Press the Sleep button(20).
ð The sleep LED(21) is illuminated.
3. In order to switch the night mode off, press the Sleep
button(20) once again.
ð The sleepLED(21) goes out.
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
Insert suitable batteries in the remote control (seechapter
Technical annex).
Info
After a longer period of non-use, the remote control
will switch to standby mode. Standby mode can be
terminated by pressing the ON/OFF button(33) on the
remote control. The device automatically uses the
current settings entered via the remote control.
24
25
26
27
28
29
30
31
32
33
No. Designation Meaning
24 Remote control
transmitter/
receiver
Communication between device and
remote control using infrared
25 Display Indication of the target temperature
during setting
Indication of the number of hours during
timer programming
Indication of the operating mode
Indication of the fan stage
Indication of the self-cleaning function
(X-FAN)
Timer on/ off indication
°C / °F indication
Key lock indication
Night mode indication
26 MODEbutton Selection button for the mode of
operation
27 Plus button For setting the target temperature for
cooling
For setting the number of hours for the
timer function
28 X-FAN button Self-cleaning function/ internal drying
during stand-by
29 TIMER button For switching the timer function on and
off: in increments of 0.5hours
(0.5h to 10h) or in increments
of 1hour (11h to 24h)
30 SLEEP button For switching night mode on and off
31 FAN button For setting the fan stage
32 Minus button For setting the target temperature for
cooling
For setting the number of hours for the
timer function
33 ON/OFF button Power button: For switching the device
on and off
Info
An acoustic signal is emitted each time a setting is
activated.
Changing the unit °C / °F
The temperature can be indicated in either °C or °F on the
remote control's display(25) and on the segment display(13) of
the device.
The temperature unit can only be changed in standby mode.
Please proceed as follows to change the temperature unit:
1. Press the minus(32) and MODE(26) buttons
simultaneously.
ð The displayed temperature is converted to the other unit.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec PAC2010E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec PAC2010E in de taal/talen: Engels als bijlage per email.

De handleiding is 10,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Trotec PAC2010E

Trotec PAC2010E Gebruiksaanwijzing - Nederlands - 23 pagina's

Trotec PAC2010E Gebruiksaanwijzing - Deutsch - 23 pagina's

Trotec PAC2010E Gebruiksaanwijzing - Français - 23 pagina's

Trotec PAC2010E Gebruiksaanwijzing - Espanõl - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info