688812
12
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
12 EN
local air conditioner PAC 2010 E / PAC 2610 E
Operation
Avoid open doors and windows.
Operating elements
23
12
13
14
15
16
18
17
19
20
21
22
No. Designation Function
12 Minus arrow button For decreasing the target
temperature (16°C to 30°C) or
the number of hours of the timer
(0.5h to 24h)
13 Segment display Indication of the target
temperature in cooling mode
Indication of the number of hours
during timer programming
Indication of the error code, see
chapter Errors and faults
°C / °F indication
14 Plus arrow button For increasing the target
temperature (16°C to 30°C) or
the number of hours of the timer
(0.5h to 24h)
15 Operating mode
LED
Indicates the selected operating
mode:
Cool= cooling
Dry= dehumidification
Fan= ventilation
16 Mode button For selecting the operating mode:
cooling
dehumidification
ventilation
17 Timer LED Illuminated when the timer is
activated.
18 Timer button For switching the timer function
on and off: in increments of
0.5hours (0.5h to 10h) or in
increments of 1hour (11h to
24h)
19 On/Off button Power button: For switching the
device on and off
No. Designation Function
20 Sleep button For switching night mode on and
off
21 Sleep LED Illuminated when night mode is
activated.
22 Fan button For setting the fan stage:
Low = lowest level
Med = medium level
High = highest level
Auto = automatic speed
regulation
23 Fan stage LED Indicates the current fan stage.
Info
An acoustic signal is emitted each time a setting is
activated.
Switching the device on
1. Allow the device to rest for a time.
2. Once you have completely installed the device as
described in the Start-up chapter, you can switch it on.
3. Press the On/Off button(19).
ð The device switches on.
4. Select the desired operating mode.
The device switches off automatically when the condensation
tank is full. H8 is displayed on the segment display(13).
Setting the operating mode
The device has the following operating modes:
cooling
dehumidification
ventilation
Cooling
In cooling mode the room will be cooled down to a certain
preselected temperature.
Upon reaching the target temperature, the device switches to
standby, i.e. the fan keeps running at the preselected level, but
the device does not resume cooling until the preselected value
is exceeded again.
1. Use the Mode button(16) to select cooling mode.
ð The operating mode LED Cool(15) is illuminated.
2. Select the desired target temperature by use of the arrow
buttons(12 or 14). The temperature can be adjusted in
increments of 1°C in a range between 16°C and 30°C.
ð The desired target temperature is indicated on the
segment display(13).
3. Select the desired fan stage by use of the Fan button(22).
ð The fan stage LED(23) indicates the desired fan stage.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec PAC2010E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec PAC2010E in de taal/talen: Engels als bijlage per email.

De handleiding is 10,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Trotec PAC2010E

Trotec PAC2010E Gebruiksaanwijzing - Nederlands - 23 pagina's

Trotec PAC2010E Gebruiksaanwijzing - Deutsch - 23 pagina's

Trotec PAC2010E Gebruiksaanwijzing - Français - 23 pagina's

Trotec PAC2010E Gebruiksaanwijzing - Espanõl - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info