665091
6
Verklein
Vergroot
Pagina terug
1/134
Pagina verder
6
GB
h) Some hand and power tool blades feature a complex geometry. If such a blade is
suitable for sharpening, it may ONLY be restored to its original geometry. NEVER alter the
existing blade features. If you are unsure how to achieve this, have the tool sharpened by
the manufacturer or a trained technician
i) Metalworking machines are potentially dangerous if not used properly. ALWAYS
adhere to commonly recognised rules and procedures concerning the operation of
metalwork machines and the use of hand tools
j) Always use the CORRECT accessories for sharpening specific tools. Never alter
accessories or jigs. Never use self-built accessories or modify the machine. This
device may be unsuitable if the accessories designed for specific sharpening tasks are
unavailable. DO NOT sharpen tools ‘free-hand’
k) Inspect the machine, its discs, wheels and accessories carefully before EVERY
use. The use of damaged abrasive wheels is EXTREMELY DANGEROUS and might cause
SERIOUS injury to the operator and people in the vicinity
l) Abrasive wheels must be well maintained and have an EVEN grinding surface.
Recondition with a stone grader or truing tool when surface shows uneven wear
m) Ensure your power circuits satisfy the earthing requirements of this machine. Never
connect to electrical circuits without protective earth, or to unprotected electrical outlet
with no circuit breaker or fuses. Consult a qualified electrician if at all unsure about how
to safely connect this machine. Incorrect or damaged electrical connections can be the
cause of electric shocks, fires and damage to the machine
Product Familiarisation
1. Leather Honing Wheel
2. Vertical Mounts for Support Arm
3. Locking Knob
4. On/Off Switch
5. Water Trough
6. Grindstone
7. Metal Washer (x2)
8. Locking Nut
9. Horizontal Mounts for Support Arm
10. Torque Adjustment Knob
Included Accessories:
11. Support Arm
12. Support Arm Height Adjuster
13. Straight Edge Jig (TWSSEJ)
14. Stone Grader (TWSSG)
15. Polishing Paste
16. Spanner 19mm
17. Grinding Angle Set-Up Jig (TWSGAJ)
Intended Use
Device for low-speed, wet sharpening and honing of a variety of tools and blades using
tool-specific jigs (optional).
IMPORTANT: This device is not designed for reshaping, repairing, or recovering overly-
damaged blades. This device is used for sharpening purposes only.
Unpacking Your Tool
Carefully unpack and inspect your tool. Familiarise yourself with all its features and
functions
Ensure that all parts of the tool are present and in good condition. If any parts are missing
or damaged, have such parts replaced before attempting to use this tool
Before Use
Fitting the Grindstone and Water Trough
1. Place the Metal Washer (7) onto the spindle, profile facing away from the body of the
machine
2. Place the Grindstone (6) loosely onto the spindle, with the depressed centre of the
grindstone facing away from the body of the machine (as shown in image)
3. Clip the Water Trough (5) into position. Use the appropriate fixing position to suit the size
of grindstone to ensure stone is free to rotate yet reaches below the max water level (as
marked on trough)
4. Place the other Metal Washer (7) onto the spindle, profile facing the grindstone
5. Fasten with the Locking Nut (8). Use the Spanner (16) to secure tightly
Note: This spindle has a reverse thread, turn nut anti-clockwise to fasten.
6. Rotate the grindstone by hand a few turns to ensure that it moves freely and accurately
Leather Honing Wheel
1. The unit is supplied with the Leather Honing Wheel (1) fitted
2. Before use, check that the honing wheel is securely fastened in place
3. Turn the Locking Knob (3) clockwise to tighten
Note: Tighten by hand only.
Note: A Profiled Leather Honing Wheel is also available to purchase as an optional accessory.
See ‘Profiled Leather Honing Wheel’ for more information.
Positioning the unit
Install the unit on a solid work surface, with all four feet securely planted on the surface
Note: This machine features four rubber feet to decrease vibration. Place it on a work surface
that does not encourage or amplify tool vibration.
Ensure there is adequate light to see the work clearly and sufficient space around the unit
so that there are no obstructions
Filling the Water Trough
1. Fill the Water Trough (5) with clean cold water up to the ‘MAX WATER LEVEL’ mark on the
side of the water trough
2. When in use, ensure the water level is always sufficient to keep the grinding surface of the
Grindstone (6) wet
Engaging the drive system
1. Tighten the Torque Adjustment Knob (10) by turning it clockwise until it is tight up against
the body of the machine. This will engage the drive system
2. After use, always loosen the torque adjustment knob. This will help to ensure the drive
wheel retains its correct shape
Using the Stone Grader
Use the Stone Grader (14) to dress the surface of the grindstone for fine or coarse grinding:
For coarse grinding, to remove a large amount of material quickly (for example, to shape a
blade):
Apply the coarse side of the stone grader to the grindstone to roughen the grinding
surface
For fine grinding, to sharpen the blade:
Apply the smooth side of the stone grader to the grindstone to provide a finer surface,
ideal for sharpening the blade in preparation final polishing of the cutting edge on the
leather honing wheel
Using the Straight Edge Jig
For use with the Support Arm (11) and Grinding Angle Set-Up Jig (17) to set the blade at
exactly the correct angle for sharpening
1. Loosen the knobs on the Straight Edge Jig (13)
2. Place the blade in the jig so that one edge of the blade is positioned against the end stops
(Image A)
3. Tighten the knobs to fasten the blade in position
Using the Support Arm
The Support Arm (11) can be attached for grinding with or against the direction of rotation
of the grindstone
For grinding against the direction of rotation:
1. Place the Support Arm (11) in the Vertical Mounts (2) (Image B)
For grinding and honing with the direction of rotation:
1. Place the Support Arm (11) in the Horizontal Mounts (9) (Image C)
WARNING: Honing must ONLY be carried out WITH the direction of rotation.
Working against the direction of rotation removes larger amounts of material more quickly
than working with the direction of rotation
Working with the direction of rotation can be used for very precise sharpening of a blade
for finer tools and is used for honing
Take your time and practise the set up with various types and sizes of blades so that you
can achieve the correct sharpening angle and ensure the blade to be sharpened is square
across the surface of the grindstone
In general, for sharpening, position the support arm in the vertical mounts and sharpen
against the direction of rotation
NEVER place the support arm in the vertical mounts when using the leather honing wheel.
Attempting to hone the blade against the direction of rotation will cause severe damage to
the honing wheel
Using the Grinding Angle Set-Up Jig
Use the Grinding Angle Set-Up Jig (17) to set the blade at exactly the correct angle for
sharpening (Image D).
1. Mount the blade in the Straight Edge Jig (13) and place the support arm in the mount
Note: The Grinding Angle Set-up Jig can be used in conjunction with other jigs in the Triton
range. See ‘Accessories’ section for more information.
949257_Z1MANPRO2.indd 6 16/03/2016 16:53
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Triton TWSS10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Triton TWSS10 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks als bijlage per email.

De handleiding is 19,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info