1-30
Operation with tape (Continued)
Timer recording using
On Screen Display (Continued)
88
Press VCR MENU to set another timer record event
and follow steps 3 to 7.
Check that the timer event details are correct.
Press VCR MENU twice.
If PLEASE CHECK is displayed, you have entered
incorrectly and will need to re-enter the data.
Press ++//11to switch your DVD+VCR to Timer
Standby mode.
The timer symbol ( ) will appear in the display
window while your DVD+VCR waits to make the
recording.
99
Press STOP (x) to end timer recording.
Notes
zDuring timer recording standby mode, the DVD and
VCR mode cannot be operated. To use the
DVD+VCR, press ++//11. After you use the DVD or
VCR, press ++//11again to put the VCR into timer
recording standby mode.
zIf at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Use v
or Vto select the event that you wish to delete or
change.
Press bto delete the event...or
Press ENTER/OK to change; then press bor Bto
select; Station, Date, Start and End times and LP.
Press vor Vto enter the correct information.
zIf Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier pro-
gramme will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and
end at 17:00.
Programme 2 is programmed to start at 16:30 and
end at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme 2
will be recorded.)
zTo watch a DVD while performing a timer recording,
press TV/VCR to select VCR mode.
zProgramme Delivery Control (PDC)
The Programme Delivery Control (PDC) system
adjusts the start and end times of a timer record
event. This can be particularly useful with sports
events which may run over into extra time. The PDC
signal is transmitted by the broadcaster and this con-
trols your video recorder’s timer. Currently only a limit-
ed number of TV companies transmit PDCsignals.
Please make sure that when recording from channels
that do not broadcast PDC that you turn PDC OFF.
OPERATION
