SPECIAL SOUND FEATURES
18
Dolby Digital
Dolby Digital is only available from DVD players and Laser Disk players connected using a Scart or phono
lead and optical or coaxial cables.
Dolby Digital
Adjustments
The DVD is connected to the TV using a Scart lead to
Scart 3 or phono leads to the COMPONENT VIDEO
INPUT and an optical or coaxial cable to the
optical/coaxial sockets.
Rear speakers are connected and the Rear
Speaker option in the Surround set up menu
is set to YES.
If external front speakers are
connected the external switch
(found on the back of the TV) is set to EXT.
The Digital input in the AV CONNECTION
menu (see page 25) is set to EXT3 if Scart 3 is used
or EXT4 if the DVD is connected to COMPONENT
VIDEO INPUT.
Set the volume and balance of the front speakers to your preference, see
page 11.
Play a Dolby Digital source and press the
M
button on the TV’s remote control.
The title, e.g. Dolby Digital 3/2, is an indication of the channels available from
your current sound source, see the table.
To adjust the levels, use the P or Q button to select the centre and two rear
speakers in turn. Press either the
S
or
R
button to adjust. The number of
adjustable speakers will depend upon the signal received from the DVD player.
To cancel the test press the EXIT button.
1
1
2
3
4
2
From the FEATURE MENU select Surround set
up
.
With Delay time highlighted, use the
S
or
R
button to change the setting to a value that
suits you.
Press EXIT when you have finished.
1
2
3
3
4
If the DVD playing is recorded in Dolby Pro Logic,
i.e. 4 channel stereo (front left, front right, centre and
rear) the TV will detect the 4 channels.
In this instance, when the Surround Test Mode is
run the TV will cycle through the four channels in use.
In order to get full Dolby Digital, the DVD
player must be connected using the coaxial or
optical links.
Dolby Digital
1/0
= Centre speaker only.
2/0
= Front Left and Front Right only.
2/1
= Front Left and Front Right +
Rear Left and Rear Right combined.
2/2
= Front Left and Front Right +
Independent Rear Left and Independent Rear Right.
3/0
= Front Left and Front Right and Centre.
No Rear Speakers.
3/1
= Front Left and Front Right and Centre +
Rear Left and Rear Right combined.
3/2
= Front Left and Front Right and Centre +
Independent Rear Left and Independent Rear Right.
!
Arrange the speakers around your normal viewing
positions (as shown on page 5) and then make sure
that the TV is set up as follows:
DELAY TIME…
If you sit a long way from the TV and close to the
rear speakers the sound from the rear will reach you
before the sound from the front. You can use a
higher setting in the Delay time option to restore
the correct balance.
Alternatively, use the
Test mode in the
SURROUND SET UP
menu.
☛
