To conserve energy it is best to turn your TV off and not to leave it in Standby, unless the timer has been set.
6
SETTING UP
The TV back connections…
…and switching your new TV on…
Connect the aerial to the socket on the rear of the television. If you use a Set Top Box and/or a video recorder it is essential that the
aerial cable is connected through the Set Top Box and/or through the video recorder to the television.
DO NOT CONNECT SCART LEADS UNTIL THE TELEVISION IS FULLY TUNED.
On the front of the TV…
If the red power-on light is unlit, press the POWER button on the front of
the TV to switch the set on and then press a number button on the remote
control to see the screen.
…and with the remote control:
Press the Standby Button i:
This allows you to put the set into
standby mode when leaving the TV
unattended for short periods of time. To
return to TV mode press the
i
button,
or any of the numbered buttons on the
remote control. The picture may take
a few seconds to appear.
To conserve energy, do not leave the
set in Standby for long periods of time.
Aerial
Video Recorder
SET TOP BOX*
Aerial Cable
Aerial Cable
Connecting and turning on
your new TV
*
a SET TOP BOX could be:
Digital Satellite, Analogue
Satellite, or any other
compatible decoder.
☛
ORANGE = Dual language
being received
GREEN = Stereo signal being received
RED = Power On
GREEN = On Timer is set
