607255
9
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
Page.9
5. Structure of concentric duct system
The installation instructions are as follows:
Installation with direct or indirect feed-through.
Direct connection.
The fire can be connected directly to the wall, using the horizontal terminal set. Possible nuisance to the
neighbourhood must be taken into account. The national building standards contains the relevant regula-
tions. In addition, ensure that the wind pressure on the outlet is not excessive (e.g. in extremely narrow pas-
sages), since this can affect the performance of the fire.
The fire can be connected directly to the wall, using the horizontal terminal set. Possible nuisance to the
neighbourhood must be taken into account. The national building standards contains the relevant regula-
tions. In addition, ensure that the wind pressure on the outlet is not excessive (e.g. in extremely narrow pas-
sages), since this can affect the performance of the fire.
Create an opening of 155 mm. in diameter in the external wall (in a flammable external wall, provide for
extra space of 50 mm. all round the outer pipe) and mount the horizontal terminal with the wall plate on the
inside of the wall. On the outside, the wall plate of the horizontal terminal must be sealed sufficiently to the
wall to prevent the possibility of damp and/or exhaust gases entering the living space.
If necessary, the duct can be enclosed.. Sufficient fire resistant measures must also be taken if the duct is to
be mounted against flammable materials. Determine the position of the fire and the outlet and start the con-
struction of the horizontal terminal set by connecting to the fire. Ensure that all connections are properly
gas tight.
Indirect connection.
The outlet can also be constructed in the outer wall in a situation where the exhaust is on top (always 1 me-
tre vertical first). Possible nuisance to the neighbourhood must be taken into account. The national building
standards contains the relevant regulations. In addition, ensure that the wind pressure on the outletis not ex-
cessive (e.g. in extremely narrow passages), since this can affect the performance of the fire.
Create an opening of 155 mm. in diameter in the outer wall (provide for extra space of 50 mm. all round
the outer pipe in a flammable external wall) and mount the horizontal terminal with the wall plate on the
inside of the wall. On the outside, the wall plate of the horizontal terminal must be sealed sufficiently to the
wall to prevent the possibility of damp and/or exhaust gases entering the living space.
If necessary, the duct can be enclosed in a pipe. Sufficient fire resistant measures must also be taken if the
duct is to be mounted against flammable materials.
Determine the position of the fire and the outlet and start the construction of the duct with the connection to
the fire. Note the direction of mounting, and connect the elements to each other by means of the locking
bands.
Fit a 90° bend directly to the horizontal terminal, and make the connection with the elements on the appli-
ance. Ensure that all connections are fully gas tight.
An adjustable length can be used between bends or for the connection to the fire. Use wall brackets to sup-
port the duct, if necessary.
Installation of the vertical terminal.
The outlet can be placed at any arbitrary position on the roof surface (inlet and outlet in identical pressure
areas) but must comply with the current regulations.
Use a flat roof panel for flat roofs, or a lead roof panel for sloping tiled roofs to ensure a watertight feed-
through. This can be sloped with the aid of various bends, if necessary. The opening in the roof decking
must be 5 cm. larger all round to ensure sufficient fire resistance. Adjustable roof plates can also be used
against the roof decking.
Determine the position of the fire and the outlet and start the construction of the duct with the connection to
the fire (always 1 metre vertical first). Note the direction of mounting, and connect the elements to each
other by means of the locking bands. Make sure that all connections are completely gas tight.
An adjustable length can be used between bends or for the connection to the fire. Use wall brackets to sup-
port the duct, if necessary.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thermocet Flat Fire M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thermocet Flat Fire M in de taal/talen: Engels als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info