607258
21
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Page 21
11. PLACING THE UNIT (first read “General instructions”)
Please note: Before placing the unit, we recommend you first read Chapter 7 “Concentric flue system” on
page 11.
11.1 Round and level unit components (See page 25 )
A. Combustion chamber J. Remote control
B. Burner plate K. Decoration plate
C. Gas control block L. Gas clamps
D. Receiver M. Window
E. Burner N. Wall plate/radiation plate
F. Ceramic wall at the back O. Restriction plate
G. Ceramic wall at the top P. Restriction plate Ø 65
H. Ceramic wall on the left Q. pilot flame cover
I. Ceramic wall on the right
11.2 Connection to the gas pipes
You can determine where the gas pipes will be placed, dependent on the layout. Ensure control equipment is not
twisted during installation and there is no excessive tension. Accessibility of various connection points in relation
to components need to be maintained. After installation, check the connections for tightness in relation to gas.
Use a 1/2“ gas tap with connection. Ensure the gas pipes are dirt-free and sand-free, and gas and combustion
products from various parts and functioning is correct. The gas connection should only be undertaken when the
electricity supply is disconnected. This prevents any damage occurring to the gas control equipment.
11.3 Placing ceramic wood blocks (See page 28 )
Please note!
You need to check if a restriction plate needs to be mounted before the wood blocks are placed. (See
page 22)
Remove the gas clamps (hold the window back) to the left, right and at the top of the unit. Screw the
bottom clamp(s) a little looser so the window is still supported and the window can be easily removed from
the unit. Place the window somewhere safe.
After the window has been removed, the log inset can be placed. To this end, please see the photo’s on page
28 outlining the order in which items are placed.
Firstly, mix the Lava stones and the so-called ‘wokkels’ (worm-shaped ceramic burner decoration material)
and distribute these over the burner and decoration plate. Ensure the ventilation slot around the burner and
pilot burner are taken into account, as these need to be kept free from decoration material.
Warning!
Do not place ceramic burner decoration material or logs against the pilot burner.
Carefully place the log inset. Different positions may have a significant influence on the flame image or
cause poor functioning of the burning process.
For maintenance activities (to the burner, pilot flame or thermocouple), the window can be removed by
dismantling the gas clamps as described above. Remove the ceramic logs one log at a time and replace
these once maintenance has been performed as described above.
Replace the window and carefully fasten the gas clamps.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thermocet Estilo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thermocet Estilo in de taal/talen: Engels als bijlage per email.

De handleiding is 3,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info