607253
6
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
Page 6
Setting first period of heating.
Press the button B4 (3x) until P 1 and
) appears on the display.
Press button B4 for slightly longer until the start time begins to flicker and appears and set the time for the start of the first period of
heating by means of the buttons B1and B2 ; hours/minutes.
Press button B4 again so that P 1 and ) appears after which the time can be set to the end of the first period of heating by means of the
buttons B1and B2 ; hours/minutes.
Press button B4 for slightly longer until the display P 2 and
* appears and set the time for the start of the second period of heating by
means of the buttons B1and B2 ; hours/minutes.
Press button B4 again so that P 2 and ) appears after which the time can be set to the end of the second period of heating by means of
the buttons B1and B2 ; hours/minutes.
Wait or press button timer again and the display will return to the start.
2.2 Igniting the apparatus
* Press buttons B1and B3 at the same time until an acoustic signal indicates that the start procedure has
begun for igniting the apparatus. Once the ignition of the pilot burner has been achieved the gas block will
set the flame height automatically to maximum.
* You can regulate the flame height by pressing on button B1 or B2 for higher or lower flame height
respectively. In order to set the apparatus on “Standby” you press on button B2 until just the pilot burner is
burning.
Warning
Wait at least 5 minutes before attempting to re-ignite the unit after turning off the pilot. Gas fires become hot
when in use. Therefore care should be taken, for instance children and those requiring help should be kept away
from the immediate area where the fire is burning. Gas fires must not be placed on or against flammable materi-
als (curtains, etc.).
2.3 Technical data:
Radio controlled Transfer Frequency:
ON 40.5 kHz, OFF 40 kHz
Range: 0.5…10m
Ambient temperature:
Transmitter and receiver: max. 60ºC
Connection cables: max. 180ºC
Maintenance
The painted parts can be wiped with a soft, moist cloth. The unit must be switched off immediately if something
has been spilled on the fire. Once the fire has cooled down the spillage can be removed with water and soft soap.
Never use an abrasive cleaning agent!
Any deposits on the glass can be removed by using a glass cleaner. We recommend having the fire and the chim-
ney checked by a fitter and having them cleaned before each heating season. If the special heat-resistant glass is
broken or cracked it should be replaced immediately before the unit is switched on again.
It is better to leave the pilot burning during the heating season (due to possible condensation formation in the
unit).
Please note: As the manufacturer we are aware that faults may occur in the electronic control of gas fires and the
great inconvenience this may cause you. Therefore we have drawn-up additional installation instructions. (See
pages 18 and 19.)
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thermocet Coventry S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thermocet Coventry S in de taal/talen: Engels als bijlage per email.

De handleiding is 3,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info