11
PLAYING BLUETOOTH AUDIO FROM A MOBILE DEVICE
Your music system can play Bluetooth audio from a mobile
phone, tablet or laptop computer.
The Bluetooth source must be paired to your music system.
Pairing with a Bluetooth device
Press the • MODE button repeatedly to select Bluetooth
mode.
‘BT LINK’ will ash on the display.
Activate • Bluetooth on the mobile device source.
If the source is a phone or tablet, Bluetooth will normally be
activated in the connectivity section of the settings menu.
If the source is a computer, Bluetooth settings should be found
in the Control Panel.
In the • Bluetooth menu of the source, there should be an
option to search for Bluetooth devices. Select this option.
The source will now scan for other Bluetooth devices and
should nd the music system, identied as ‘DMS1702’.
Choose to pair with this.•
If the device features Bluetooth technology earlier than V2.1,
you will be asked for a password.
If so, enter 0000.•
Your Bluetooth source will now be connected to the music
system. Once connection has been established, the ‘BT LINK’
display will stop ashing.
After pairing for the rst time, the music system will appear in
the connection menu of your Bluetooth device.
Re-connecting
Your device should re-connect automatically when next used if
no other device has been connected since.
Playing music
Once connected you can select music on the source and play it
through your music system.
Volume control
When playing Bluetooth audio it is possible that the volume
control of the source will also aect the volume level from your
music system.
Ensure that the volume control of the source is set at a high
enough level.
Playback control
Some mobile devices will support remote control for music
navigation. In this case //, on your music system can be used
to select play/pause at the source, and } and { will select
the next or previous track.
Disconnecting a device
You can disconnect a device if required. This may be necessary if
you want to pair your system to a dierent Bluetooth device.
Press and • hold the PAIR button.
The device will be disconnected and your system will be available
to pair with another device.
You can play a personal audio player or a computer through
your audio system by connecting it to the AUDIO IN jack on the
front panel.
To connect an AUX source
Connect the source to the AUX IN jack with a 3.5mm jack •
cable (not supplied).
To select AUX operation
Press the • MODE button repeatedly to select AUX mode.
To play the AUX source
Set the AUX source to play.•
Adjust the volume.•
If the volume level is too low, try increasing the volume level on
the source volume control.
Auto Standby in AUX mode
When playing in AUX mode the Auto Standby time is extended
to 4 hours.
After this time Standby will set.
To continue listening after Auto Standby, press the •
STANDBY button.
PLAYING VIA AUX IN
