16 |
ENGLISH
Bobbin Winding
To remove the bobbin case
Remove the extension table from the sewing machine
by pulling it to the left. Open the shuttle cover by pulling
down the tab that is on the left side of the cover.
Raise the needle to its highest position by turning the
handwheel towards you.
➀ Shuttle cover
Hold the bobbin case by the hinged latch and pull the
bobbin case straight out of the shuttle.
➁ Bobbin case
➂ Hinged latch
To remove the bobbin
Release the latch of the bobbin case and the bobbin
will drop out as illustrated on the left.
➃ Bobbin
To wind the bobbin
The spool pin is used to hold the spool of thread in
order to feed the thread to the machine. The spool pin
is found inthe back of the sewing machine.
To use:
➀ Spool pin
➁ Felt
➂ Spool of thread
1 Release the clutch by pulling the handwheel out. This
will stop the needle from moving while you wind the
bobbin.
2 Pull the thread from the spool and guide the thread
around the thread guide.
➃ Thread guide
3 Pass the thread between the tension disks. Thread
the bobbin by passing the thread through the hole in
the bobbin from the inside to the outside.
4 Wind the thread a few times by hand around the
empty bobbin in a clockwise direction.
5 Push the bobbin winder spindle to the right.
6 Press the foot control gently to wind the bobbin. The
machine will stop automatically when it is full. Return
the bobbin winder spindle to its original position by
pushing it to the left and cut the thread.
7 Push the handwheel in to engage the clutch. The
sewing machine will not function if the clutch is not
engaged. Return the bobbin winder spindle to its
original position by pushing it to the left and cut the
thread.
8 Push the handwheel in to engage the clutch. The
sewing machine will not function if the clutch is not
engaged.
