682965
24
Verklein
Vergroot
Pagina terug
1/248
Pagina verder
English
(24)
Before requesting service, make the below
checks. If you are in doubt about some of the
check points, or if the remedies indicated in the
chart do not solve the problem, contact your
dealer.
No power.
Is the AC mains lead plugged in?
Plug the mains lead in firmly. (
14)
There is power but no sound.
Sound is weak.
Are connections to the amplifier/receiver’s
PHONO terminals correct?
Connect the PHONO cables to the amplifier’s
PHONO terminals. (
14)
Left and right sounds are reversed.
Are the stereo connection cable connections
to the amplifier or receiver reversed?
Double check all connections. (
14)
Are connections of the head shell's lead wires
to the cartridge terminals correct?
Double check all connections. (
11)
Humming is heard during play.
Are there other appliances or their AC mains
lead near the stereo connection cable?
Separate the appliances and their AC mains
lead from this unit.
Is the earth lead connected?
Make sure the earth lead is correctly
connected. (
14)
The Strobe light or the blue
indicator blinks.
Perform the following operation when the
strobe light or the blue indicator blinks.
The symptom may be improved.
Turn [ON/OFF] to OFF.
Pull out the power plug, wait for three
seconds, and then insert the plug again.
Turn [ON/OFF] to ON and press
[START-STOP] to rotate the turntable.
If the strobe light or the blue indicator blinks
again, check which one is blinking and
contact our service representative.
Troubleshooting guide
Updating the firmware
To improve operation or add new functions,
the firmware for the unit is updated on an as
needed basis.
Before updating
From the support website, download the
firmware for version upgrade and create a
USB memory for version upgrade.
See the following website for how to create
a USB memory for version upgrade.
www.technics.com/support/firmware/
1
Turn [ON/OFF] to OFF and
remove the turntable.
(
13)
2
Connect the USB memory for
version upgrade to UPDATE
terminal of the
unit.
3
Turn [ON/OFF] to ON.
When update is
started, the update
lamps light up from
left to right.
4
Check that all of the four update
lamps are lit, and then turn
[ON/OFF] to OFF.
It takes approximately 120 seconds to
update the firmware.
5
Remove the USB memory.
Attention
Do not press [START-STOP] when the
turntable is removed.
Use a USB memory with FAT16 or FAT32
format.
Do not connect any USB device other than
the USB memory for version upgrade to the
UPDATE terminal of this unit.
No USB device can be charged from the
UPDATE terminal of this unit.
If after connecting the USB memory and
turning [ON/OFF] to ON, the update lamps
fail to light up within 15 seconds or they are
blinking, see the following website.
www.technics.com/support/firmware/
UPDATE
UPDATE
terminal
SERVICE
ONLY
Update lamps
24
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technics SL1200G bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technics SL1200G in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 22,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info