536119
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
RQT7020
6
1 Fit the turntable and turntable mat.
Put the turntable on the center spindle and then lay the mat
on top.
Be very careful when putting the turntable on the main unit.
The magnet on the bottom of the turntable is finely adjusted
and sharp contact can cause it to move and lead to poor
operation. Ensure the magnet remains free from dust and
iron particles.
Do not adjust the screws attaching the magnet to the turn-
table. The rated performance of the unit cannot be guaran-
teed if the magnet is moved.
2 Attach the head shell.
Fit the head shell into the tone arm, keep it horizontal and
tighten the locking nut.
3 Attach the balance weight to the rear
of the tone arm.
If the cartridge weighs between 10 and 13 grams, attach the
included auxiliary weight to the main balance weight.
Balance weight
Putting the player together
In order to prevent damage during shipping some of the equipment
has been disassembled.
Put the player together in the following order.
Do not connect the AC mains lead until set up is complete.
Leave the dust cover off until set up and adjustments are com-
plete.
1. Connect the PHONO earth lead and stereo PHONO
cables to the amplifier PHONO terminals.
White (L)
Stereo phono cable
Red (R)
If the earth lead isnt connected, a hum will be heard from the
AC power source.
You will not have adequate volume or sound quality if connect-
ing to an amplifier that has no PHONO terminals.
For the United Kingdom:
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 4 BEFORE PROCEEDING TO STEP 2.
2. Connect the AC mains lead.
Connect this cord only after all other connections are complete.
Confirm the wattage of AC outlets on amplifiers and receivers
before using them for this unit. This unit consumes 15 W.
For your reference
There is an AC line-voltage selector under the turntable. This allows
you to change the voltage if you move to an area with a lower volt-
age. Check the voltage of your area before using the unit. If the
selector needs to be changed, turn it with a screwdriver.
Locking nut
Head shell
1
2
3
Magnet
Screws
Turntable mat
Turntable
Tone arm
Center spindle
SIGNAL GND
PHONO TUNER
(L) (R)
1
1
2
Amplifier
(not included)
This unit
To household
mains socket
Earth lead
Stereo phono cable
Connections and installation
Connecting to an amplifier and AC mains lead
Auxiliary weight
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technics SL-1200GLD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technics SL-1200GLD in de taal/talen: Engels als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Technics SL-1200GLD

Technics SL-1200GLD Snelstart handleiding - Nederlands - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - Nederlands - 76 pagina's

Technics SL-1200GLD Snelstart handleiding - Deutsch - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - Deutsch - 76 pagina's

Technics SL-1200GLD Snelstart handleiding - English - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - English - 12 pagina's

Technics SL-1200GLD Snelstart handleiding - Français - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - Français - 76 pagina's

Technics SL-1200GLD Snelstart handleiding - Italiano - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - Italiano - 76 pagina's

Technics SL-1200GLD Snelstart handleiding - Espanõl, Polski, Dansk, Svenska - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info