536119
10
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
RQT7020
10
Adjustments while using the unit
Pitch control
Fine adjustment to the number of revolutions per minute.
1 Press [reset] to turn off the green LED
light.
2 Press [±16/±8] to select the pitch.
When [±16/±8] is pressed once (up position), the [±16] pitch
indicator lights on the pitch control slider.
When [±16/±8] is pressed twice (down position), the [± 8]
pitch indicator lights on the pitch control slider.
3 Slide [pitch adj.] while the turntable is
revolving.
Move the control to the required position.
The numbers represent approximate percentages.
Pitch can be adjusted between 8 % and +8 % or 16 % and +16 %.
To reset pitch to the preset value
Press [reset].
The green LED indicator lights and the pitch immediately returns to
the set value (33 1/3 or 45 r/min), regardless of any adjustments
made with [pitch adj.].
Press [reset] again and pitch returns to the adjusted value.
To measure pitch
The four rows of strobe mirrors around the edge of the turntable can
assist you in measuring pitch.
They are lit by the strobo light as they pass and each row appears to
stand still at a different pitch.
Strobo light
Read the pitch control slider replacement instructions that comes
with this product carefully when replacing the pitch control slider.
Adjusting tone arm horizontal weight to
reduce skipping when scratch playing.
The horizontal weight of the tone arm can be adjusted using the
horizontal weight control knob on the gimbal suspension to reduce
skipping when scratch playing.
For scratch play
Turn the knob all the way in the A direction to apply horizontal
weight.
For normal play
Turn the knob all the way in the B direction to reduce horizontal
weight.
Do not move the horizontal weight control knob when playing mu-
sic.
When the horizontal weight control knob becomes worn
out
Replace with a new horizontal weight control knob.
Loosen the fastening screw to remove the knob.
Consult with a qualified dealer when purchasing a horizontal
weight control knob.
Use the following product number when asking for the replacement.
Product reference No. RGZ0053Z-S.
off
on
p
o
w
e
r
0
6
BRAKE
S
F
reset
Pitch control
+
6.4 % change in pitch when stationary
+
3.3 % change in pitch when stationary
Normal turntable speed when stationary
_
3.3 % change in pitch when stationary
Adjusting the turntable brake speed
Brake speed can be adjusted by pressing [start-stop] until the turn-
table stops.
Use a small screwdriver in the hole on the turntable to adjust the
brake speed.
S: Slow stop
F: Fast stop
Green
LED indicator
Variable range
pitch button
Horizontal weight control knob
Screw
Knob
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technics SL-1200GLD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technics SL-1200GLD in de taal/talen: Engels als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Technics SL-1200GLD

Technics SL-1200GLD Snelstart handleiding - Nederlands - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - Nederlands - 76 pagina's

Technics SL-1200GLD Snelstart handleiding - Deutsch - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - Deutsch - 76 pagina's

Technics SL-1200GLD Snelstart handleiding - English - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - English - 12 pagina's

Technics SL-1200GLD Snelstart handleiding - Français - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - Français - 76 pagina's

Technics SL-1200GLD Snelstart handleiding - Italiano - 2 pagina's

Technics SL-1200GLD Gebruiksaanwijzing - Italiano - 76 pagina's

Technics SL-1200GLD Snelstart handleiding - Espanõl, Polski, Dansk, Svenska - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info