hear 2 clicks when it reaches the correct position.
(Fig.3).
· The message “Insert PORTION: 0” will appear in
the screen.
· Press the buttons “+” and “-“ at the same
time and the “Language” message will appear in
the screen. You can use the “+” and “-” keys to
select the 9 languages available and confirm by
pressing the “START” button (A6).
USE
· Unroll the cable completely before plugging it in.
· Connect the appliance to the mains.
· Turn the appliance on, by using the on/off switch.
· The message “Awaiting JAR” will appear in the
screen (A1) (Fig.4). For safety reasons, the
machine will not function if the jar is not in place.
· Fit the blade (E) onto the spindle of the lid (D),
and ensure that it is correctly secured. (Fig.5).
· Place the vessel (F) into the jar (G).
· Place the jar in the machine with the handle to
the user’s right- hand-side (Fig.2).
· Couple the jar by turning it 90º clockwise. When it
reaches the correct position, you will hear 2 clicks
(Fig.3).
· The screen will display the message “Insert
PORTION: 0 “
· Select the portion you wish to process, between
1 and 10, by using the “+” button to increase the
portion (?) and the “-“ button to reduce it.
· The “STOP / DELETE” button sets the counter to
0.
· Press the “START” button to begin the
processing.
· The screen will display the portions requested,
those processed and an arrow indicating whether
the machine is raising or lowering.
· When the process is complete, you will hear an
acoustic signal and the screen will be lit in green,
indicating the portions that have been processed
and those remaining unprocessed in the vessel.
· If the serving has not been selected on
pressing the “START” button, the appliance will
automatically process 10 portions.
· In some preparations pressure may remain in the
jar (G). Always press the decompression button
(K) to enable the jar (G) to be removed.
· When a vessel is processed with excess frozen
food, the appliance will detect that the container
is over-full and is only processing up to the
correct filling level and it will return to the initial
status. The message “ERROR” container very
full” will appear in the screen.
· If you notice any strange noise while the machine
is running, stop it and check that the accessories
and the blade are properly attached and that the
vessel has no indentations. If the noise persists,
contact the technical assistance service.
DOUBLE PROCESSING FUNCTION
· The double processing function enables you to
make a second pass of the blades through the
processed frozen food, in order to obtain optimum
textures in frozen foods that are very cold or have
a high-water content. To do this, press the button
corresponding to this function (A3).
· The screen will show the message “2P” beside
the selected portions. The machine will perform
this function on the selected portions when the
“START” button has been pressed.
CANCEL FUNCTION
· The cancel function allows the interruption of the
use of the appliance. To do this, press the button
(A7).
· The screen will display the message “Starting”,
the machine will return to its initial position and
the screen will display the message “Insert
PORTION: 0” when the machine is ready to
process once more.
· When the machine has reached the start, we
recommend checking that the blade is well
secured before beginning a new processing.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE
· Turn the appliance off, using the on/off switch.
· Unplug the appliance from the mains.
· Clean the appliance.
Manual ROWZER PLUS 2018.indd 17 15/11/18 9:54
