161727
24
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
1-Introduction
24 TASCAM CD-RW900
When audio signal is not detected more than ve sec-
onds, the CD-RW900 automatically will stop recording
and enters record standby mode.
NOTE
In the Sync 1 mode, if the unit detects the signal which
is under the adjusted level over ve secondsd, the Sync
recording mode will be canceled.
3 To cancel the Sync recording mode, press the
SYNC REC key and select the Sync OFF. Record-
ing returns to normal and continues till you press the
STOP key or the source signal stops.
Pressing the STOP key stops recording. Once
stopped, the selected mode will be canceled.
NOTE
When the Sync 1 is on, and the READY key is
pressed, Sync recording stops and the setting will
be canceled.
When the Sync ALL is on, and the READY key is
pressed, the unit enters recording standby mode
with remaining the Sync recording setting.
If you set the value only high-level signals trigger re-
cording, remember that this will not record the start
of a piece:
Also remember that when recording from an analog
source, the threshold should be set so that it is high-
er than the “noise oor”. If the “noise oor” is higher
than the threshold, a false start will occur:
5−Recording
Automatic track division
The trigger level can also be used to divide tracks if the
A_TRACK (auto track) function is enabled.
When this function is enabled, the unit automatically in-
serts a track division in the recorded material.
To enable or disable automatic track division:
1 Use A_TRK option in the REC sub-menu to set the
mode on. The
A.TRACK
indicator at the top right of
the display lights.
2 Rotate and push the MULTI JOG dial to select and
enter the modes following:
Level
When the sound level has dropped below the
threshold for more than two seconds, and sound
has re-started, the track will be divided.
Use A_TRK LEVEL option in the REC sub-menu.
The trigger level is set to -24dB to -72 dB.
DD (digital direct)
When recording digitally from MD, CD or DAT, this
mode detects a track boundary and divides the
track.
However, when the DD mode is on, and if the analog
source or non-DAT/CD/MD digital connections are
detected, the track number will be increased by the
setting level that you set in the Level mode.
A_LVL
At least
2 seconds
level
time
Track increment
S_LVL
REC ready
level
time
Five seconds
Recordsing starts
level
time
T h i s p a r t o f
the track is not
recorded
Start of track is not registered
level
time
Noise is higher
than threshold
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam cdrw900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam cdrw900 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info