617905
11
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
TASCAM HS-8 11
2 − Names and functions of parts
Rear panel
g ANALOG INPUTS 1-8 connector
This 25-pin D-sub connector is for analog balanced
line input. The pin assignments are as follows.
h ANALOG INPUTS A and B connectors
These A/B balanced XLR connectors are for analog
balanced line inputs (1: GND, 2: HOT, 3: COLD). Set
which channels the signals input through these
connectors are recorded to using the unit settings.
j DIGITAL I/O (ADAT) 1-8 connectors
These connectors are for the input (IN) and output
(OUT) of ADAT optical format digital audio. Sampling
frequencies of 44.1 kHz and 48 kHz are supported.
k REMOTE cover
This cover is attached when the unit is new. Remove
the two screws from the cover to access and use the
REMOTE connector.
l RS-422 connector
This 9-pin D-sub connector is for RS-422 serial control.
Connect an external controller, for example, here.
NOTE
This cannot be used at the same time as the RS-232C connector. (See
“RS-422 page” on page 48.
; RS-232C connector
This 9-pin D-sub connector is for RS-232C control.
Connect an external controller, for example, here.
NOTE
This cannot be used at the same time as the RS-422 connector (See
“RS-232C page” on page 48.)
z PARALLEL connector
This 25-pin D-sub connector is for parallel control.
Connect an external controller, for example, here.
x AC inlet
Connect the provided AC power cord set here.
c ANALOG OUTPUTS 1-8 connector
This 25-pin D-sub connector is for analog balanced
line output. The pin assignments are as follows.
v ANALOG OUTPUTS L/A and R/B connectors
These A/B balanced XLR connectors are for analog
balanced line outputs (1: GND, 2: HOT, 3: COLD).
These output the stereo signal mixed in this unit or the
monitoring signal (the same sound output from the
PHONES jack, including soloed tracks, etc.).
b DIGITAL I/O (AES/EBU) 1-8 connector
This 25-pin D-sub connector is for digital audio input
and output in AES/EBU (AES3-2003/IEC60958-4)
format.
Transmission occurs at double speed when the
sampling frequency is 88.2 or 96 kHz and at quad
speed when 176.4 or 192 kHz.
The digital input section includes a sampling
rate converter that is compatible with sampling
frequencies between 32–216 kHz.
The pin assignments are as follows.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam HS-8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam HS-8 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info