617905
9
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
TASCAM HS-8 9
Press this key while recording to put the unit in
recording standby. Both the PAUSE and REC keys light
during recording standby.
w REC key/indicator
When a recordable CF card is installed and the unit is
stopped, press this key to put the unit into recording
standby. Both the PAUSE and REC keys light during
recording standby.
Press this key while recording to stop recording the
current file, and continue recording to a new file.
CAUTION
If you press the REC key less than 4 seconds after beginning
recording, the unit will not start recording a new take.
Depending on the folder setting for mono recording les, the
required time could be even longer. (See “Folder where les are
saved in mono mode” on page 33.)
Depending on other conditions, recording of a new take
might not be possible when the REC button is pressed during
recording. (See “Recording operation limitations” on page 29.)
Recording is not possible if any of the following conditions
apply. Change the recording folder.
The folder contains 999 takes
The number at the end of the take name has reached 999
The remaining recording time indicator on the Home Screen
shows “Rec Limit”. (See “Recording operation limitations” on
page 29.)
e JOG/SHUTTLE dial
When in jog operation mode, turn this to change the
playback position by a corresponding amount.
When in shuttle operation mode, turn this to adjust
the playback speed according to the degree of rotation.
If you return to the original position when in shuttle
operation mode, the transport status is restored to
how it was before shuttle playback was begun.
r PHONES knob/jack
Connect stereo headphones to this standard stereo
phone jack. Use the PHONES knob to adjust the
headphones output level.
CAUTION
Before connecting headphones, turn the PHONES knob to the
minimum volume. Failure to do so could cause sudden loud noises
to occur, which might damage your hearing or equipment.
t KEYBOARD connector
Connect an IBM PC-compatible keyboard with a
PS/2 interface, and use it to input project, folder, and
channel names, for example. By default, the unit is set
to use a US keyboard. To use a Japanese keyboard,
since the key allocation is different, change the setting
on the
PREFERENCES
page of the
SYSTEM
SETUP
screen.
(See “PREFERENCES page on page 52.)
y PROJECT key
Press to open the
PROJECT
screen. (See “PROJECT
screen overview” on page 33.)
u EXIT/CANCEL (PEAK CLEAR) key
Press to cancel input or item selection. On the Home
Screen, this functions as a reset button for peak hold
marks shown on the level meters.
When the
MENU
screen or
PROJECT
screen is open,
press this to return to the Home Screen. On other
screens, press this to return to the previous screen.
When a pop-up window is open, press this to cancel
an operation.
i CALL (CHASE) key
Press to locate the call point, which is where playback
last started from playback standby, and resume
playback standby.
Press this key while pressing the SHIFT key to turn
synchronization with external timecode ON/OFF.
o LCD TILT button
Press this button to unlock the color display, so that
you can adjust its angle by pulling the bottom of the
display outward.
To put the display away, press this button to unlock it
and push the bottom inward.
p Ô ( )/ ( ) (search) keys
Use these keys to search.
Ô ( ): Search backward
( ): Search forward
Press one of these keys while pressing the SHIFT key
to search at high speed
a Â/¯ (MARK Â/¯) (SKIP) keys
Use these to skip to the previous/next take.
Press these keys while pressing the SHIFT key to move
to the previous/next mark. After moving, the same
playback state resumes (stopped/standby/playback).
s MARK key
Press this key to add a mark at the currently located
time. The maximum number of marks, including
automatic marks, possible in a single file (take) is 99.
(See “Mark functions” on page 55.)
d SHIFT key
When stopped/in playback standby/during playback:
Press the
 while pressing and holding this key
to move to the previous mark, and resume the same
playback state.
Press the
¯ key while pressing and holding this
key to move to the next mark, and resume the same
playback state.
Press a
Ô ( )/( ) key while pressing
and holding this key to search at high speed.
Press the
JOG (SHUTTLE) key while pressing and
holding this key to activate the shuttle operation
mode.
Press the
STOP (RETAKE) key while pressing and
holding this key to retake the recording (erasing the
last recorded take).
2 − Names and functions of parts
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam HS-8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam HS-8 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info