617907
93
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
TASCAM HS-2 93
D-IN button:
Synchronize with the clock of the digital signal
selected as the input for DIGITAL IN.
You cannot select an input as the master clock if the
sampling rate converter is ON for that input.
On the second line of the button, the digital input
signal selected is shown.
NOTE
A mark appears on the button of the currently
active master clock.
If synchronization from an external clock is interrupted,
the units internal clock becomes active. In this case,
the mark appears on the
INT
button to show that it
has become the active clock, and the mark appears
on the button of the selected external clock that was
lost.
SYNC page
Make settings related to synchronization on this page.
NOTE
If the Option SY-2 has not been installed, the display is
shaded and the setting cannot be selected.
STATUS
Shows the status of the currently loaded project’s
sampling frequency and clock synchronization.
TC Chase
Use to turn playback synchronized with timecode
ON
or
OFF
(default).
Set it to
ON
when you want to match the timing of
this units audio with a timecode master device (audio
recorder, video or built-in time code generator).
You can also set timecode offset (TC Offset) with the
timecode master device. Touch the
EDIT
button to
open the
CHASE Offset
screen where you can set the
offset value in a range between
23:59:59.29
and
+
23:59:59.29
(default:
00:00:00.00
).
NOTE
TC Chase
can also be turned
ON
and
OFF
by pressing the
SHIFT and CALL keys at the same time.
TC Rechase
Turn this function, which re-synchronizes when synchro-
nization with timecode becomes inaccurate,
ON
or
OFF
(default).
When set to
OFF
, after synchronizing once, input time
code is ignored and the unit operates in free run mode.
When set to
ON
, set the amount of inaccuracy that triggers
rechasing.
To set the amount of inaccuracy that triggers rechase,
touch the knob and turn the DATA dial to select a value in
frames of
1/3
,
1
,
2
(default),
5
or
10
.
Master TC
Set whether the unit synchronizes with the built-in
timecode generator or with timecode input from another
device.
Internal button:
Synchronize with the built-in generator.
External button (default):
Synchronize with timecode input from another device.
10–Internal settings
93

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam HS-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam HS-2 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info