617907
92
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
92 TASCAM HS-2
Auto Ready
Turn the auto ready function
ON
or
OFF
(default).
If auto ready is
ON
, when playback of a take completes the
unit automatically stops at the beginning of the next take.
This setting affects all modes except timeline mode.
Inc. Play
Turn the incremental play function
ON
or
OFF
(default).
When incremental play is
ON
, press the PLAY key during
playback to move to the beginning of the next take and
continue playing, or press the STOP (RETAKE) key during
playback to move to the beginning of the next take and
pause playback.
This setting affects all modes except timeline mode.
PLAY Inhibit Time
This sets a time interval during which playback of the
same take (entry) cannot be restarted.
The following keys and commands are disabled (excluding
flash start keys/commands for other takes/entries) for the
duration of this setting. The following keys and commands
are disabled (excluding flash start keys/commands for
other takes/entries) for the duration of this setting. The
PLAY key on the front panel of the unit, the PLAY key,
flash start keys and fader start function of the TASCAM
RC-HS20PD remote control (sold separately), and play and
flash start commands from external controllers (RS-232C/
RS-422/ Parallel/ Keyboard).
Setting range:
01000
msec (100 msec intervals),
Inf
(during playback the affected keys are disabled for this
amount of time)
Default value:
0 msec
NOTE
When the
PLAY Inhibit Time
item is set to
Inf
, the
incremental play function is automatically fixed to OFF
and cannot be switched to ON.
Sync and time code settings (SYNC T/C)
Make various settings related to audio synchronization
and time code on this page.
This screen has five pages:
CLOCK
,
SYNC
,
T/C
,
SETUP
and
I/O
. Touch the tabs at the bottom of the screen to open
the corresponding page.
CLOCK page
View various clock status information and select the clock
used for synchronization.
STATUS
Project:
Displays the sampling frequency of the project.
CLOCK:
Displays the clock synchronization status.
WORD/VIDEO:
Displays
WORD
,
VIDEO
or
TriLevel
if such a signal
is detected at the input.
D-IN:
Displays the digital input signal status as shown in
the following table:
Digital input signal status Display
Locked
Locked (xx.xxx kHz)
When sampling rate conversion
is ON
L o c ke d (x x.xx x kHz
FsCnv)
Unlocked
Unlocked (xx.xxx kHz)
No signal
Unlocked (no signal)
No audio signal present
Not Audio
Other Cbit information differs
from the actual operation mode
Unmatched Cbit
MASTER
Use the buttons to select the master clock to use.
INT button (default):
Use this unit’s internal clock.
WORD button:
Synchronize with the word clock input through the
WORD/VIDEO IN connector.
VIDEO button:
Synchronize with the video clock input through the
WORD/VIDEO IN connector.
10–Internal settings
92

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam HS-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam HS-2 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info