19
position of the Temperature Station and the transmitter (see notes on
“Positioning” and “868 MHz Signal Reception”).
When more than one transmitter is used
1. User shall remove all the batteries from the temperature station and transmitters
and wait 60 seconds if setting has been done with one transmitter before.
2. Insert the batteries to the first transmitter.
3. Within 30 seconds of powering up the first transmitter, insert the batteries to the
Temperature station. Once the batteries are in place, all segments of the LCD
will light up briefly. Following time as 0:00 and the indoor temperature will be
displayed. If they are not shown in LCD after 60 seconds, remove the batteries
and wait for at least 60 seconds before reinserting them.
4. The outdoor temperature from the first transmitter (channel 1) should then be
displayed on the Temperature station. Also, the signal reception icon will be
displayed. If this does not happen after 2 minutes, the batteries will need to be
removed from both units and reset from step 1.
