20
5. Insert the batteries to the second transmitter immediate after (in 10 seconds
after) inserting battery to the Temperature station.
6. The outdoor temperature from the second transmitter and the "channel 2" icon
should then be displayed on the Temperature station. If this does not happen
after 2 minute, the batteries will need to be removed from all the units and reset
from step 1.
7. Insert the batteries to the third transmitter immediate after (in 10 seconds after)
inserting battery to the second transmitter.
8. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will
be displayed and the channel icon will shift back to "1" once the third transmitter
is successfully received. If this is not happen, user shall restart the setting up
from step 1.
IMPORTANT:
Transmission problems will arise if the setting for additional transmitter is not followed
as described above. Should transmission problems occur, it is necessary to remove the
