19
Patches
VoiceTone contains 99 effect patches. Each patch can
have any combination of settings and effects including
reverbs, delays, μMod, and Transducer. The patches are
organized into categories. Refer to the Patch List section
for descriptions of the categories and each effect Patch.
Selecting Patches:
1. Turn effects on by tapping the Right Footswitch so
that the Effect On Light turns red.
2. Select a patch by turning the Patch Knob to the
desired patch number as indicated on the Numeric
Display.
Tweaking Selected Patches:
1. Turn the knobs labeled Tweak X or Tweak Y to
change the patch's sound. When you turn the Tweak
Knobs, the Numeric Display shows the specific X or Y
value. After several seconds, the X or Y value display
times out, and the selected patch number is again
indicated on the Numeric Display.
Performances and Parts
Performances and parts allow you to sequence through
your favorite effect patches while keeping your hands
free to practice mic techniques, or wave to your adoring
audience. There are five performance locations. Each
location has an A and a B part. Each of these locations
can store a specific patch including any tweaks made
with the Tweak Knobs. When a performance is stored,
both the A and B part are stored simultaneously.
Selecting Performances and Parts
1. Press a Performance Button (1 - 5) to select that
performance.
2. Press the Left Footswitch to toggle between part A
and part B of the selected performance. The selected
part is indicated by the Part A/B Lights.
Patches, Performances, & Parts
The Patch List section details assigned tweak
parameters.
NOTE:
