- Answer Delay
- Select 2, 4, 6, 8 rings or Time saver mode
- Record Time
- Set the maximum length for incoming messages
- Remote Acc.
- Switch remote access on or off
- Compression
- Set the desired recording quality (low compression=high recor-
ding quality)
-
BS Screening
- Incoming messages are played back over the handset.
- Change PIN
- Change remote access PIN code (see below)
Memory full
The recording capacity of your answer machine is 15 minutes (including outgoing mes-
sages). If the memory is full,
TAM full
appears on the handset display and FF flashes
on the base station display. No more messages can be recorded. The answer machine
switches to Answer only mode automatically. You must delete old messages.
Remote Access / Setting the remote access PIN code
Remote operation can only be performed after changing the default remote access PIN
code before activating the function. Any 4-digit PIN code is allowed apart from 0000:
• Press , select
Ans. Machine
and press OK.
• Select
TAM Settings
and press OK.
• Select
Remote Acc.
and press OK.
• Select
Change PIN
by pressing the navigation keys †/π and press OK.
• Enter the remote access PIN code (0000 on delivery) and press OK.
• Enter the new PIN code and press OK.
• Enter the PIN code again and press OK.
Remote activation of the answer machine from the handset
• Press , select
Ans. Machine
and press OK.
• Select
TAM Settings
and press OK.
• Select
Remote Acc.
by pressing the navigation keys †/π and press OK.
• Select
On
or
Off
by pressing the navigation keys †/π and press OK.
If you set the answer delay to Time Saver, your answer machine will answer
after 2 rings if you have new messages. If you do not have new messages it
will not answer until 6 rings. This enables you to save costs by hanging up
before you are connected.
Aeris 214 / 214T
Aeris 214 / 214T 35
Aeris 214_214T_GB_121109_Aeris 124_GB_020709 12.11.09 14:36 Seite 35
