• Press , select
Ans. Machine
and press OK.
• Select
TAM Settings
and press OK.
• Select
Answer Mode
and press OK.
• Select the desired operating mode and press OK.
Outgoing message
Your answer machine comes with two standard pre-recorded outgoing messages. You
can replace the standard outgoing message with a personal one:
• Press , select
Ans. Machine
and press OK.
• Select
TAM Settings
and press OK.
• Select
OGM Settings
and press OK.
• Select
Ans & Rec
or
Answer only
and press OK.
• Select
Record Mess
and press OK.
• Speak your outgoing message into the handset microphone.
• Press OK to end recording. The recorded outgoing message is played back.
Record memo
You can leave a message behind for other internal users by recording a memo:
• Press , select
Ans. Machine
and press OK.
• Select
Memo
and press OK.
•
Recording
appears. Speak after the tone.
• Press OK to end recording.
Listening in
Incoming messages are played back over the base station loudspeaker. You can
adjust the volume by pressing the keys + or -. Press the left softkey on the handset to
listen in. Press the Talk key to answer an incoming call.
Operating the answer machine on the base station
If you have new messages, the message counter is flashing. The messages are played
back beginning with the most recent.
• Press
®/■ to start playback.
• During playback the following options are available:
Aeris 214 / 214T
Aeris 214 / 214T 33
Aeris 214_214T_GB_121109_Aeris 124_GB_020709 12.11.09 10:18 Seite 33
