When scrolling the Profile Memory, surfacing (depth 0.0 m [0 ft]), surfacing with
SLOW warning on, the ASC TIME and downward pointing arrow are shown when
they occurred during the actual dive.
At the end of the profile the depth 0.0 m [0 ft] is displayed together with the total dive
time of that dive.
Dive Numbering
Several repetitive dives are considered to belong to the same repetitive dive series
when the SOLUTION
á
has not deactivated itself. Within each series, the dives are
given individual numbers. Thus the memory will contain dives with the same dive
numbers, as these dives have been made within different dive series. When the
surface time has been less than 10 minutes, the dives are considered to be the
same. The dive number will not change for the second part of such a dive.
4.2 DIVE HISTORY MEMORY
The Dive History is activated by touching the TIME/MODE and COM contacts until
HIS appears. This mode will show:
- the maximum depth ever reached
- the total accumulated dive time in hours
- the total number of dives
999 dives and 999 hours of diving can be registered. When these maximum values
are reached, the counters will start again from 0.
4.3 ALTITUDE/ PERSONAL ADJUSTMENT SETTING
The current altitude/ personal adjustment mode is shown when diving as well as on
the surface display. If the mode is not correct (see Chapter 3.5), it is imperative that
the diver enter the correct selection before diving.
The new altitude/ personal adjustment setting is entered in the following way. In
these figures the contacts which are connected are shadowed.
1. Activate the altitude/ personal adjustment setting mode by connecting the
TIME/MODE and COM contacts continuously. Release your fingers immediately
when Alt appears on the display. Within a couple of seconds the present altitude/
personal adjustment setting is shown.
