4. MENU BASED MODES
The menu based functions include the logbook, profile and history memories, the
altitude/ personal adjustment setting, the dive simulator and the date and time
setting. The menu based functions are activated using the water contacts. Keep
your fingers on the TIME/MODE and COM contacts while the SOLUTION
á
scrolls
through the menu.
The desired mode is selected by breaking the finger contact when the desired mode
appears on the display:
- LOG: Logbook and Dive Profile Memories. The Logbook gives a summary of
each dive to approximately 25 hours of diving. The Profile Memory
shows the detailed profile of these dives.
- HIS: Dive History Memory. The Dive History is a summary of all dives
recorded by the SOLUTION
á
.
- Alt: Altitude/ Personal Adjustment setting
- dSI: Dive Simulator
- Set: Date and Time Setting
When scrolling through the menu, a bar segment on the right-hand side of the
display will indicate the scrolling sequence. Note that the menu based modes can
be activated only when 10 minutes have elapsed after the dive. Make sure that the
contacts and the instrument itself are dry and clean before trying to use the menu
based modes.
All menu based modes can be deactivated by the RETURN command, i.e. by
connecting all three contacts simultaneously, or by immersing the SOLUTION
á
in
water.
4.1 Logbook and Dive Profile Memory
The SOLUTION
á
has a very sophisticated high capacity Logbook and Profile
Memory, with data being recorded every 60 seconds. Dives shorter than the
recording interval are not registered. This interval can be reduced to 20 or 30
seconds using the optional SOLUTION
á
PC INTERFACE.
Logbook Memory
The logbook memory is activated by touching the TIME/MODE and COM contacts
until LOG appears. It will give access to approximately 25 hours of diving (14 or 9
hours in case the recording interval has been set to 30 or 20 seconds), starting with
the most recent dive made.
