9
A. Construcon and characteriscs
• Transportable terrace/garden heater with tank housing.
• Casing in steel with powder-coang or in stainless steel.
• Gas hose connecons with metal clamp (screw caps for Germany). Heat emission from reector.
B. Specicaons
• Use propane, butane or their mixtures gas only.
• Max. waage: 12500 was
• Min. waage: 5000 was
• Consumpon:
C. Table of injector
• The hose and regulator assembly must conform to local standard codes.
• Regulator outlet pressure should meet the corresponding appliance category in B. Specicaon.
• The appliance requires approved hose in 1.4m length.
A regulator (compliees with EN16129:2013 and the naonal regulaon) of the correct pressure corresponding to the appliance category.
Use 30mbar regulator for butane/propane under the category I3B/P(30). Use 30mbar regulator for butane under the category I3+(28-30/37).
Use 37mbar regulator for propane under the category I3+(28-30/37).
Use 50mbar regulator for butane/propane under the category I3B/P(50).
It’s recommended to use exible hose that approved by EN16436: 2014.
PARTS AND SPECIFICATIONS
APPLIANCE CATEGORY: I3+(28-30/37) I3B/P(30) I3B/P(50)
TYPES OF GAS: Butane Propane Butane, propane or
their mixtures
Butane, propane or
their mixtures
GAS PRESSURE 28-30 mbar 37 mbar 30 mbar 50 mbar
OUTLET PRESSURE
OF REGULATOR: 30 mbar 30 mbar 30 mbar 50 mbar
Using the proper regulator according to outlet pressure of regulator as showed in the table above.
APPLIANCE CATEGORY: I3+(28-30/37) I3B/P(30) I3B/P(50)
TYPES OF GAS: Butane Propane Butane, propane or
their mixtures
Butane, propane or
their mixtures
GAS PRESSURE 28-30 mbar 37 mbar 30 mbar 50 mbar
TOTAL HEAT
INPUT
(Hs): (Qn)
9 kW (G30:650g/h; G31:650g/h) 12,5 kW (900g/h)
INJECTOR SIZE
1.5 mm for main burner 1.5 mm for main burner
The marking, for example, 1.5 on the injector, indicates that the size of injector is 1.5 mm
EN
