PART 1 • English
5
English
2.0 CONNECTION
2.1 Connecting to Terrestrial Antenna
To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN
connector at the back of the receiver. (FIGURE 1)
2.2 Connecting to TV and VCR with SCART cable
The TV set should be connected with the receiver through a SCART cable (fig. 1). This terrestrial
receiver may also be operated together with a VCR using the loop through function. The loop-
through function of this terrestrial receiver is active when the receiver is powered off. As soon as the
VCR is turned on, its video and audio signals are looped through the terrestrial receiver.
Optional: using coaxial cable, connect TO TV output of the receiver to aerial input of your VCR and
aerial output of VCR to aerial input of your TV set. This will allow you to watch and record analogue
aerial programs to your VCR.
2.3 Connecting to a Digital Audio Amplifier
The Digital Audio Amplifier is connected with the receiver from the S/PDIF connector (fig. 2)
2.4 Connecting to PC
The RS-232 connector on the receiver is to connect to the PC using a serial cable (fig. 3). This allows
you to download new versions of software to your receiver.
