424428
13
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
Part 1 • English
www.strongsat.com 23
5.1.4.2 LNB Set-up (Please see inside cover Screen 17)
It is recommended that you read the manual and installation instructions of your LNB,
your DiSEqC switch, your 0/12V switch and your Positioner before you start setting up
your LNB.To set up your LNB, please apply the following steps:
1. Press the Menu button.
2. Using UP/DOWN keys, select
"Installation" and press OK.
3. Using UP/DOWN keys, select "LNB Set-up" and press OK.
4. Check the exact specifications of your LNB through the manufacturers information
or your dealer. There are up to 16 types of LNB's available.The Default is set to
Universal mode (9750/10600MHz), DiSEqC is not used and the LNB is mounted
on a fixed dish.
5. Use the UP/DOWN keys on your remote to select an item and use the
LEFT/RIGHT buttons to set up any values.
z LNB: Up to 16 LNBs are available, select the correct one according to your
LNB specifications.
z LNB Type: Select the LNB type from Universal 1 - 3, and Single. You should
type the LNB value in Single. In Single, the item parameter is 0 or another
number. In UNI 1-9750/10600 MHz, UNI2-9750/10700MHz, UNI3
9750/10750 MHz
z LNB Power: Select 13/18V, 13V or 18V for LNB. Select "Oil" if you want to
switch the power of the LNB off.
z LNB Dish: Using the Left/Right buttons, select "Fixed" or "Motorized" (Move)
Dish. If you use a motorized dish, read the "Positioner Set-up" (Described in
section 5.1.4.3.1 ).
z DiSEqC switch: The default is Off. To use the DiSEqC switch, set up the
DiSEqC version you have (V 1.0 or V 1.1 ).
z DiSEqC Input: Select position 1-4 if DiSEqC switch is DiSEqC V1.0.Select
position 1-16 if DiSEqC switch is DiSEqC V1.1.
z DiSEqC Repeat: Designate the repeat of switching. (0 - 3)
z Switch 0/12V: You can set the 0/12V switch On or Off. This is for the black
RCA Output at the back of your receiver.
z Switch 22KHz: You can set the 0/22kHz switch to ON or OFF.
Part 1 • English
24 www.strongsat.com
Tip: If you set "LNB type" to "Universal" (UNII - UNI3), you will not be able to change
settings in both the "LNB Power" menu item and the "Switch 22kHz' menu item. If you
want to change any of these two settings you must set "LNB type" to zero. If DiSEqC
switch is Off, you will not be able to change settings in both the "DiSEqC Input" and
"DiSEqC Repeat" menu items. Alternatively if you set LNB Dish to "Moved", the
DiSEqC switch menu item is automatically switched to off if your "LNB dish" is set to
"fixed" you will be able to select the required DiSEqC level in the DiSEqC switch menu
item.
6. Press the Red (Save) button, the Blue (Save &Exit) button to save the setting.
7. Press the Green (Exit) button or Exit button if you don't want to save the setting.
5.1.4.3 Channel Set-up (Please see inside cover Screen 18)
The channel set-up is for downloading tile channels available on the satellites.
There are up to 64 satellites available. To download channels, please apply the
following steps:
In this menu, you can edit the satellites name, and edit the transponder of the satellite.
You can also display the LNB menu and the Positioner Set-up menu by selecting LNB
and Dish Position respectively.
1. Press the Menu button.
2. Using UP/DOWN keys on your remote, select "Installation" and press OK.
3. Using UP/DOWN keys, select "Channel Set-up" and press OK.
4. Use the UP/DOWN keys on your remote to select an item and use the Left/Right
button to set up any values.
z Satellite: Select "Satellite" and press OK or the Right button. The satellite list
is displayed and then you can choose a satellite from which you want to
download your channels from by pressing OK.
Tip: If you want to rename the satellite, press the FUNC button on the remote
control when you are in the list of satellites.
z LNB: Select "LNB" and press OK or the Right button. In the "LNB field", select
one of the available LNB's. If you want to set LNB related values, press OK
and the LNB Set-up menu (Described in section 5.1.4.2) will be displayed.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Strong-srt-4356-pvr

Zoeken resetten

  • kan iemend mij vertellen hoe ik de nederlandse kanalen op volgorde van ned.1, ned.2 etc op de receiver geinstalleerd krijg, ze zitten nu na verplicht opnieuw installeren van de kanalen , verspreidt over alle dik 800 kanalen Gesteld op 2-5-2011 om 16:55

    Reageer op deze vraag Misbruik melden
    • hallo
      heb je ze al onder de faforieten verdeeld?
      Zo niet dat gaat zo:Menu/pincode/ga naar kanalen organiseren/druk ok/druk de blauwe knop /en dan kun je de kanalen zo verdelen zoals je het wilt dan staan ze nog niet op volgorde maar sluot dit af en op volgorde gaat het zo:
      Menu/pincode/ga naar faforieten organiseren /druk rode knop/met de gele knop aanvinken met de op/neer knop neerzetten op de plaats waar je het wil.succes. Geantwoord op 4-5-2011 om 09:32

      Waardeer dit antwoord Misbruik melden
  • kan ik met de strong 4356 pvr opnemen en tegelijk naar een andere zender kijken Gesteld op 10-3-2011 om 20:52

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong srt 4356 pvr bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong srt 4356 pvr in de taal/talen: Duits, Engels, Italiaans als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info