424428
11
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
Part 1 • English
www.strongsat.com 19
z Channel: You can select the channel to be recorded when the Timer mode is
PVR record, Time Interval or power on, or the channel displayed when the
power is ON.
3. Press the Red button to save and proceed with another timer event
4. Press the Blue button to save and exit the timer menu
5. Press the Green button to exit the timer menu WITHOUT saving the settings
Tip: You have to select the channel, starting time, and ending time settings if the Timer
mode is "Time interval" or "PVR Recording". An error message will appear if any of the
settings are incorrect. Especially in PVR Record, be sure to check the hard disk
capacity, starting time and ending time.
5.1.4 The Installation Menu. (Please see inside cover Screen 9)
All settings that are related to TV, Dish, LNB and Satellites are within this menu. The
installation menu contains several sub menus such as "System Set-up ", "LNB Set-up
", "Channel Set-up" and "Parental Lock". To access the different sub menus, apply the
following:
5.1.4.1 System Set-up Menu (Please see inside cover Screen 10)
To install your receiver to your personal preferences, go to "System Set-up" menu.
Then please apply the following steps:
1. Press the Menu button.
2. Using UP/DOWN keys, select "Installation" and press OK.
3. Using UP/DOWN keys, select "System Set-up" and press OK.
z Language Settings: You can change the language of the menu, audio and
subtitles by applying the following steps:
1. Select "Language Settings" and Press OK or the Right button.
2. Select "Menu Language' and Press OK or the Right button.
3. Using UP/DOWN keys, select the language in which you want your menu to be
displayed and press OK. The screen of the menu will change to the language of
your choice.
4. You can also choose your preferred first audio language, second audio
language and the subtitle language by applying the same steps.
Part 1 • English
20 www.strongsat.com
5. Press EXIT until you return to the main menu.
z TV/VCR Settings: You can set the TV/VCR settings to your personal
preferences. Check your TV and VCR user manuals for the correct settings.
You can change your TV/VCR settings by applying the following steps:
(Please
see inside cover Screen 11)
1. Select "TV/VCR Settings" and press OK or the Right button.
z TV Mode: Press OK or the Right button and set your TV mode to "Multi",
"PA L " or "NTSC ".
z Video Mode: Press OK or the Right button and set your VCR mode to
"CVBS" (Composite video) or "RGB" (preferred option if your TV set is
compatible with it).
z Screen Mode: Press OK or the Right button and set your screen mode to
"Full Screen" or "Letterbox".
z Audio Mode: Press OK or the Right button and set your audio output to
"Stereo ", "Left only" or "Right only" (left or Right is for mono TV sets)
z SPDIF Output: Press OK or the Right button and activate your S/PDIF
output on the back of your receiver, so you can connect it to a digital Audio
amplifier using an optic fiber cable.
z VCR Scart: Press OK or the Right button and set the scart output to "Auto"
or "STB" (Set Top Box). If set to "STB ', the VCR scart signal is not
automatically looped through.
z UHF Mode: Press OK or the Right button and set the UHF mode to "PAL
B/G", "PAL l" or "PAL D/K". If the TV set is connected using a coaxial (RF)
cable, you must select RF modulator type here. The RF modulator type
affects the channel audio.
z UHF Channel: Press OK or the Right button and set the UHF channel
number to the same UHF channel number of your TV set. This only has to
be done if your TV set is connected with a coaxial (RF) Cable. If the UHF
Channel numbers of the receiver and the TV set are not set the same, no
picture will be displayed.
2. Press EXIT until you go back to main menu.
z OSD Settings: You can set the OSD (On Screen Display) on your TV to your
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Strong-srt-4356-pvr

Zoeken resetten

  • kan iemend mij vertellen hoe ik de nederlandse kanalen op volgorde van ned.1, ned.2 etc op de receiver geinstalleerd krijg, ze zitten nu na verplicht opnieuw installeren van de kanalen , verspreidt over alle dik 800 kanalen Gesteld op 2-5-2011 om 16:55

    Reageer op deze vraag Misbruik melden
    • hallo
      heb je ze al onder de faforieten verdeeld?
      Zo niet dat gaat zo:Menu/pincode/ga naar kanalen organiseren/druk ok/druk de blauwe knop /en dan kun je de kanalen zo verdelen zoals je het wilt dan staan ze nog niet op volgorde maar sluot dit af en op volgorde gaat het zo:
      Menu/pincode/ga naar faforieten organiseren /druk rode knop/met de gele knop aanvinken met de op/neer knop neerzetten op de plaats waar je het wil.succes. Geantwoord op 4-5-2011 om 09:32

      Waardeer dit antwoord Misbruik melden
  • kan ik met de strong 4356 pvr opnemen en tegelijk naar een andere zender kijken Gesteld op 10-3-2011 om 20:52

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong srt 4356 pvr bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong srt 4356 pvr in de taal/talen: Duits, Engels, Italiaans als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info