480561
9
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
6
Українська
Antenna Power: Use the tu to turn antenna power on / off/. Before connecting the
antenna, please read the User Guide for the antenna. If you use an active
internal or external antenna that requires power supply voltage of 5 V DC
and consumes less than 50 mA, then set it to On. Otherwise, set it to Off.
After all settings are made (including the adjustment of the antenna), press BLUE button on the remote
control to start scanning for channels.
The receiverwill start searching forchannels. On the screenwill be displayed information about the
scannedfrequency,foundTV and Radiochannels andchannel searchprogress. Once thechannel scanis
complete, the receiverwill turnon the first channel, whichis in the list.
NOTE: If at the end of the search the receiver did not found channels, it is
possible that your antenna is not correctly installed/aligned. To ensure
good results and the proper antenna configuration, refer to qualified
professionals.
4.1 Activation ofthe receiver inthe digital terrestrialTV operator‘s network
IMPORTANT Your receiver comes pre-activated to view most of the encoded
digital terrestrial channels broadcast by the operator on a free basis
to subscribers. However, watching some channels may require fee. To
gain access to paid channels, you should contact Customer Support.
Information required to contact the Customer Support are in the
additional instructions that came with the documentation supplied
with the receiver.
After the first turn the receiver will automatically receive additional
information from the digital broadcasts. The process of obtaining the
data may take several minutes, during which the receiver will display a
message that there is no right to watch a channel. At this time, do not
change channels. Wait for the image of the transmitted channel.
5.0 DAILY OPERATIONS
In this section of the manual sets out the most frequently used functions the receiver.
5.1 Switching on and off the receiver
To switch your receiver ON and OFF, use the button marked with q. This button is located on the remote
control and front panel of the receiver.
Press on this button to switch the receiver into standby mode that consumes no more than 1.00 watts of
power. Press the button again to turn receiver to operating mode.
If you plan not to use the receiver for a long time, unplug it from the mains by unplugging the power
adaptor from the outlet.
5.2 Changing channels
5.2.1 Switch channels in the view mode
For the sequential switching of channels in the view mode you can use buttons pq or PG+ / PG. For
direct switching to a channel with a certain number you can dial the channel number using buttons 09.
5.2.2 Switch channels through the channel list
To switch between the channels through the channel list, do the following:
In view mode, press OK - on the TV screen will be displayed a list of channels.
Using the button pq select from the list a channel you are interested to watch and press OK -
channel list will disappear from the screen and the receiver will show the chosen channel.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8502 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8502 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info