480561
8
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
5
Українська
3.0 CONNECTING THE RECEIVER
Before you make any connection to the receiver to other devices or equipment, make sure that the
receiver is connected to all attached devices are disconnected from their sources of supply.
3.1 Connecting the antenna
Connect the cable from the terrestrial antenna (internal or external) to the ANT IN connector located on
the rear panel of the receiver. This connector marked as “АНТ ВХІД”.
3.2 Connecting to TV
This receiver can be connected to a TV in one of two ways.
1. With the cable 3RCA-3RCA (included).
Connect the cable from one side to the terminals (outputs) of the receiver, on the other
hand, to the connectors (inputs) of TV set. The connection should be done in accordance
with the color-coded connectors.
2. With cable HDMI (not included)
Connect one side of the cable to the connector on the receiver. The second side of the cable
to the appropriate connector on the TV.
Fig.6
3.3 Connecting to a digital audio amplifier.
Connect the (output) S / PDIF receiver to the appropriate connector (input) digital audio amplifier.
Fig.6
3.4 Connecting an external USB drive.
Make sure the plug-in USB drive consumes less than 500 mA. If your hard drive consumes more than
this value, use an external power supply for the USB drive. If you use a USB flash drive with an external
power source, you must first connect a USB storage device to a power source, then connect the drive to
the receiver.
Fig.7
4.0 THE FIRST INSTALLATION
After completing all the necessary connections, turn on the TV. Check the connection of the receiver to
the TV and the wall outlet, turn on the receiver. Wait for the menu on the TV screen „Installation wizard“.
You should do the necessary settings.
OSD Language: Use the tu, select the OSD language.
Country: displayed for information
Subtitle Display: Use the tu to enable / disable subtitles.
Press BLUE button to move to the next screen.
Aspect Ratio: Using the buttons tu, select the aspect ratio depending on the
connected TV 4:3 or 16:9.
Conversion: Use buttons tu, to change aspect conversion.
HDMI Resolution: Use the tu, select the resolution according to the characteristics of
the connected TV.
After pressing the BLUE button on the remote you get to the next window Channel Search, which will
allow you to adjust the antenna for good reception of signals and to scan channels.
In this menu:
Channel: select a frequency channel, which is being broadcast in the region
where you live.
Adjust the antenna so as to achieve the best indicators of level and
quality of the signal displayed on the screen.
Frequency (MHz) shows the frequency of the selected channel,
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8502 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8502 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info