480565
16
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
13
English
6.3.5 Parental Control
After selecting this menu and pressing OK you will be asked to enter the PIN code DEFAULT PIN: 0000.
This menu allows you to use the EPG based parental rating system, given this is supported by the local
broadcast.
Age: Use t/u to change these settings. Following rates are available: OFF (to
disable the function), 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17 and 18.
Whenever switching through channels which submit EPG based parental rate
and the rate of the current broadcast is below the adjusted rate, you will have
to enter your PIN code.
EXAMPLE: Your youngest child is 7 years old, so you have adjusted a rate of 07. You are switching
to a channel which is not foreseen for an age below 10 years, so at this channel you will
have to enter the PIN code DEFAULT PIN: 0000.
6.3.6 Reset Factory Default
This option allows you to reset the receiver to the factory settings, which clears all stored channels and
settings.
WARNING: By resetting your receiver to the factory default, all your settings and stored channels
will be permanently deleted. Please use this option with care
After selecting this menu item and pressing OK you will be asked to enter the PIN code DEFAULT PIN:
0000. After you have performed this action you will be guided to the Installation Guide again!
If necessary, you can change the PIN code. To change the PIN code, please enter the Tools menu, see
chapter 6.4.3 of this manual.
6.4 Tools
Press MENU and use t/u to select Tools then press OK. Following submenus will be displayed: Timers,
Information, Change Password, USB Upgrade, OAD Upgrade and Remove USB device.
Use p/q to select a submenu and press OK or u to access.
6.4.1 Timer
The timer function allows you to turn the receiver on and off according to the defined settings. Timers can be
set from the EPG in the most convenient way but you can also set timers manually through this menu.
In the menu Schedule, a summary of the configured timers will be displayed: number, channel name,
date, start and end time, repeat and timer status.
NOTE: If no timers have been configured, the list will be empty.
You can add, change or delete a timer.
Add: To add a timer, press the RED button. In the new opened menu use t/u p/q
and 09 to configure the settings for the event. After the settings have been made,
set the necessary parameters and press OK to apply the timer into the list.
Channel Type: Use t/u to select between TV and radio programmes (the radio option is not
available if there are no radio channels broadcasted/in the channel list).
Channel No.: Use t/u to select the channel number to which you want to switch.
Channel Name: Here the channel name will be shown according to the channel number in above.
Start Date: Use 09 to enter the date on which the timer should switch the receiver on.
Please consider the date format dd/mm/yyyy.
Start Time: Use 09 to enter the start time.
End Time: Use 09 to enter the end time.
Repeat: Use t/u to select in which cycle the timer should be repeated. Once - the
timer will switch ON once, after this the setting will be removed from timer list.
Daily - the timer will switch ON every day at the desired time. Weekly - the timer
will switch ON once a week at the desired time.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8200 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info