480565
15
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
12
Screen Mode: Use t/u to adjust this setting in accordance with the aspect ratio of your TV
set (4:3 or 16:9) and the preferred conversion. Options are: Auto (automatic
detection of aspect ratio), 4:3 Panscan (displays 16:9 broadcasts full screen and
cut upper and lower parts of 16:9 video on your 4:3 TV), 4:3 letterbox (displays
16:9 widescreen broadcasts with black bars on top and under the picture on a
4:3 TV). For a modern 16:9 TV set following options can be set: 16:9 Wide Screen,
16:9 PillarBox (4:3 broadcasts will be shown with black vertical bars on the left
and right side of the image) and 16:9 Pan&Scan. We recommend trying these
settings in order to find the option that suits you best. Do not forget about the
possibility to control the TV format via the menu of your TV set.
HDMI Output: Allows you to change the resolution of the HDMI output. If the connected TV
does not support the newly set resolution, then you will see a black screen. In
this case, wait for 10-15 seconds without pressing any button on the remote
control of the receiver, and the previous value will be recovered automatically.
Loop out in stand-by: This allows to by-pass the antenna signal to the ANT OUT connector, where
you may have an additional TV set/receiver connected, in order to receive
analogue/digital broadcasts there too.
Digital audio: Use t/u to adjust this setting in accordance to the used audio equipment. To
loop the digital audio through HDMI or S/PDIF to a connected amplifier, home
theatre or other equipment able to decode AAC and AC3, set RAW HDMI ON.
If neither your TV set nor any other connected audio equipment supports
decoding of AAC and AC3, set RAW HDMI OFF.
6.3.3 Time Setting
This menu allows you to specify the method for synchronising of date and time and you can set the
duration for displaying the information banner.
Time Offset: Use t/u to choose Auto to automatically synchronise time and time zone with
the broadcast, or Manual, to specify the time zone manually.
Region: Use t/u to set your specific country.
Time Zone: This setting is only available when the Time Offset is set to Manual. You can
use t/u to set the time zone, if the automatic settings in your region are not
supported by the broadcast.
Summer Time: Use t/u to select On or Off according to your local season.
Banner Time OUT: Use t/u to choose between the available settings: 3s, 4s, 5s, 6s, 7s, 8s, 9s and 10s.
6.3.4 Auto Standby
Auto Standby is a new feature that helps you reduce power consumption. When Activation is set to On,
the receiver will switch to standby if it doesn’t receive any commands for three hours. Set Auto Standby to
Off to deactivate this function. When the setting is On you can set the Duration Before Standby: Available
settings are: 1 Hour - 12 Hours with steps of one hour.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8200 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info