480572
9
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
6
PART 2 • English
4.2 Country Selection
Select the desired country by using tu and press OK to continue.
4.3 Antenna Installation
In the Antenna Installation Menu the necessary settings for the dish installation will be displayed. Depending on the
selected country there might have been already done a setup for your satellite dish (Austria and Germany: Astra 19.2E
on DiSEqC input 1/ Czech and Slovakia: Astra 23.5E on DiSEqC input 1). These settings will allow you to receive signal
automatically. If you are using another dish setup please ask your installer for further setup and refer to chapter 5.3.1
Antenna Installation. After you confirmed correct parameters with OK, you will be guided to the next step.
Tip If you see that the signal bar levels are orange you might need to adjust your dish position in small steps
until the signal strength and quality bars turn green. Try to reach the maximum possible strength and
quality level. Once you are sure that the signal cannot be improved,x the dish on this position.
4.4 Channel set-up
Here you have the opportunity to select desired installation method Preset, Preset Plus or Auto Search. If you select
Preset and Preset Plus, the receiver will load the country specific channel list. If you select Preset Plus or Auto Search,
you will be guided to the next screen for channel scan.
4.5 Auto Search
Select your preferred channel search method with pq. Via tu you can change the kind of scan process. If you
adjusted these settings according your wishes press OK to start channel search. The search process will take some time
(depending on the chosen search method). After the channel search has finished, the FIRST TIME INSTALLATION is
completed and the first programmed channel will be displayed on screen.
5.0 MAIN MENU
All important settings and features of your receiver can be operated in Main Menu. The Main Menu consists of
following sub-menus: “Program Table”, “Favourites”, “Installation”, “Configuration”, “Timer”, “Games”, “Media Browser”
and “CA System.” To enter Main Menu press the OPTS button in viewing mode.
5.1 Program Table
In Main Menu screen, use the pq buttons to select Program Table and press OK to enter this menu. In this menu,
you can choose between following actions: Select, Move, Delete, Edit and Lock desired channels. With BACK you can
always cancel actions and exit the actual menu or submenu.
Select
In this mode you can select different channels you want to watch and decide maybe afterwards what you want to do with
this desired channel. Use the
pq buttons in the program table to go through the channel list, furthermore you can use
the RED (PG up) and GREEN (PG down) buttons for scrolling page wise. With OK you can switch to selected channel.
The frequency and satellite name of the selected program will be displayed below the picture of this channel.
Move
Here you can change the order of desired channels. Select Move with the
tu buttons, then the channel with the pq
buttons and press OK to mark it for moving (coloured dark blue and marked with move sign). Now you will be able to
choose a new position for the desired channel with the
pq buttons, confirm the new position with OK. If you don’t
want to move the selected channel, you can cancel by pressing BACK.
Delete
Select Delete with the
tu buttons, then with the pq buttons the channel you want to delete and press OK to mark it
for deletion. Pressing OK again will unmark the selection. After you have marked all channels you want to delete, press
BACK. You’ll be asked if you want to delete the selected programs. Select YES to confirm and NO to cancel deletion.
Edit
Select Edit with the
tu buttons, then with the pq buttons the channel you want to edit and press OK to enter
renaming line. Use the NUMERIC buttons to enter the desired name and press OK to confirm. For cancellation press
BACK. Maximum value for inserted characters is 15.
Lock
Select Lock with the
tu buttons, then with the pq buttons the channel you want to lock and press OK to mark it
for locking. First you’ll need to insert your PIN Code (Default: 0000). Then the desired program will show the padlock
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 7500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 7500 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info