592543
8
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
1514
Permanent light function
If a mains switch is installed in
the mains supply lead, the light is
capable of the following functions
in addition to the simple "ON/OFF"
function:
Sensor operation
1) Switch light "ON"
(when light is"OFF"):
Turn switch "OFF" and "ON" once.
Light stays "ON" for the period
selected.
2) Switch light "OFF"
(when light is "ON"):
Turn switch "OFF" and "ON" once.
The light goes out or switches to
sensor mode.
Manual override
1) Activate manual override:
Turn switch "OFF" and "ON" once.
The light is set to stay on for 4 hours
(red LED lights up behind lens).
Then it returns automatically to sen-
sor mode (red LED off).
2) Deactivate manual override:
Switch "OFF" and "ON" once. The
light goes out or switches to sensor
mode.
Important:
The switch should be actuated in
rapid succession (in the 0.5 –1 sec.
range).
l
Once installed, the sensor can be
put into operation. Control dials
are provided on the sensor unit for
selecting time, twilight and pro-
gramme settings. After pressing the
engagement lug f with a flat-bladed
screwdriver, the sensor unit can be
removed for ease of setting. The
IS NM 360 and connected light
switch to permanent light "ON".
Switch-off delay
(time setting) g
(factory setting: 5 sec.)
Light "ON" time can be adjusted
continuously from 5 sec. to 15 min.
Control dial set to = shortest time
(5 sec.)
Control dial set to + = longest time
(15 min.)
When setting the detection zone, it is
recommended to select the shortest
time .
Functions , ,
g
h i
5 sec. – 15 min.
Programme setting
i
(factory setting:
programme 1)
2 - 2000 lux
Twilight setting
(response threshold)
h (factory setting:
daylight operation
2000 lux)
The sensor's response threshold can
be infinitely varied from 2 – 2000 lux.
Control dial set to = daylight opera-
tion at approx. 2000 lux.
Control dial set to = night-time
operation at approx. 2 lux.
To adjust the detection zone in day-
light, the control dial must be set to
(daylight operation).
2 - 2000 lux
* Note on comfort programme
4
-
midnight
The sensor contains no integrated
clock, the middle of the night is
determined by the length of the dark
phases. To work perfectly, therefore,
it is important for the connected
load to be permanently supplied
with power during this period. Dur-
ing the first night (calibration phase)
basic brightness remains activated
throughout the night. Values remain
saved even in the event of mains
power failure. We recommend not
to interrupt the power supply in
programme
4
. As the values are
determined over several nights, the
connected load should, in the event
of any fault, be observed over several
nights to ascertain whether the switch-
off time moves towards midnight.
Functions , ,
g
h i
Standard programme
1
Sensor "ON" only in response to
movement as from the selected
light threshold setting
Comfort programme
2
- evening
Sensor "ON" for approx. 2 hours as
from the selected twilight setting,
followed by normal sensor mode (4)
Comfort programme
3
-
evening/morning
Sensor "ON" for approx. 2 hours as
from the selected twilight setting,
followed by normal sensor mode
and, once again, approx. 2 hours of
constant light as from the twilight
setting at dawn
Comfort programme
4
- midnight*
Sensor "ON" to the middle of the
night* as from the selected twilight
setting, followed by standard
programme
GB
IS NM 360_Osteuropa Vs_D.indd 17 15.10.12 11:22
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel IS NM 360 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel IS NM 360 in de taal/talen: Duits, Engels, Pools als bijlage per email.

De handleiding is 2,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info