592543
7
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
Installation instructions
System components
Dear customer,
Congratulations on purchasing your
new STEINEL infrared sensor and
thank you for the confidence you
have shown in us. You have chosen
a high-quality product that has been
manufactured, tested and packed
with the greatest care.
Please familiarise yourself with these
instructions before attempting to
install the sensor light since prolonged
reliable and trouble-free operation
will only be ensured if it is installed
properly.
We hope your new STEINEL infrared
sensor will bring you lasting pleasure.
a Mini sensor
b Wall mount
c Designer trim
d Connection, concealed wiring
with load
e Connection, exposed wiring with
load
f Engagement lug for removing
sensor unit
g Time setting
h Twilight setting
i Programme setting
j Principle
k Adjusting the detection zone
l Manual override
m Sealing plug
Principle
The IS NM 360 combines timeless,
aesthetic design with practical
additional benefits. There are 4 sen-
sor and NightMatic combinations
to choose from for automatically
switching light "ON" and "OFF" just
as you please.
The integrated high-performance
infrared sensor is equipped with a
double 360° sensor that detects the
invisible heat emitted by moving
objects (persons, animals etc.).
The heat detected in this way is
converted electronically into a signal
that switches the light on automati-
cally. Heat is not detected through
obstacles, such as walls or panes of
glass. Heat radiation of this type will,
therefore, not trigger the sensor. The
unit achieves a coverage angle of
360° with an aperture angle of 90°.
A sneak-by guard ensures coverage
below the sensor.
Important: The most reliable way
of detecting movement is to install
the infrared sensor so that it points
across the direction in which a
person would walk and by ensuring
that no obstacles (such as trees,
walls etc.) obstruct the line of vision.
Reach is restricted when you walk
straight towards the sensor.
GB
j
1312
Safety warnings
During installation, the electric
power cable to be connected
must be voltage-free. Therefore,
switch "OFF" the power first and
use a voltage tester to make sure
the wiring is off circuit.
Installing this infrared sensor in-
volves work on the mains voltage
supply. This work must therefore
be carried out by a specialist in
accordance with the applicable
national wiring regulations and
electrical operating conditions.
(
k
-VDE 0100,
a
-ÖVE/ÖNORM
E8001-1,
h
-SEV 1000).
Only use genuine replacement
parts.
Repairs must only be made by
specialised workshops.
Installation
The site of installation should be at
least 50 cm away from another light
because heat radiated from it may
activate the system. To obtain the
specified reach of 8 m, the sensor
should be installed at a height of no
more than 2 m.
Connecting the mains and load
supply lead (see illustration)
The mains supply lead is a 3-core
cable.
L = phase conductor (usually
black or brown )
N = neutral conductor
(usually blue)
PE = protective-earth conductor
(green/yellow)
If you are in any doubt, identify the
conductors using a voltage tester;
then switch "OFF" the power again.
Connect phase conductor (L),
neutral conductor (N) and protective
earth conductor (PE) to the terminal
block. Getting the cable connec-
tions crossed will produce a short
circuit in the unit or in your fuse box.
In this case, you must identify the
individual cables and re-connect
them.
Note: A mains switch for switching
the unit "ON" and "OFF" may of
course be installed in the mains sup-
ply lead. A mains switch is required
for the manual override function (see
Manual override function l).
Adjusting the detection zone
The detection zone can be limited
to suit requirements. The shrouds
supplied with the unit can be used
to mask out as many lens segments
as you wish. This prevents the light
from being activated unintentio-
nally, e.g. by cars, passers-by etc.,
and allows you to target danger
spots. The shrouds and film covers
can be cut along the pre-grooved
divisions. Then you simply clip
them onto the lens.
k
GB
IS NM 360_Osteuropa Vs_D.indd 15 15.10.12 11:22
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel IS NM 360 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel IS NM 360 in de taal/talen: Duits, Engels, Pools als bijlage per email.

De handleiding is 2,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info