720798
6
Verklein
Vergroot
Pagina terug
1/194
Pagina verder
6
GB
Always insert batteries correctly with regard to polarity
(+ and –), as marked on the battery and the equipment.
Do not short battery terminals.
Do not charge disposable batteries.
Remove dead batteries immediately and dispose of per
local codes.
Do not dispose of batteries in re.
Keep batteries out of reach of children.
Remove batteries when the device is not in use.
Battery Installation (Figure B)
Open the battery cover (10) by gently pressing in at the
locations (23) shown in Figure B. Connect the 9V battery (24)
(6F22 or equivalent), ensuring polarity. Close battery door.
Battery Replacement (Figure B)
When the symbol
appears, the battery is low and
should be replaced.
Wait until the thermometer turns off automatically. Open the
battery cover (10) by gently pressing in at the locations (23)
shown in Figure B. Replace battery with 9V battery (24) (6F22
or equivalent), ensuring polarity is correct. Close battery door.
Components
THERMOMETER (Figure A)
1 Button
2
Button
3
Button
4 MODE Button
5 Built-in 1/4-20 Nut
6 Handle
7 LCD Display
8 IR Sensor
9 Measurement Trigger
10 Battery Cover
11 Laser Pointer
NOTE: The thermometer can be attached to a suitable support
with a 1/4-20 bolt using the thermometer’s built in 1/4-20 nut (5).
LCD INSTRUCTION (Figure A)
12 MAIN DISPLAY shows the present reading or last reading.
13 DATA HOLD indicator appears when the reading on the
main display is locked.
14 MEASUREMENT INDICATOR appears and ashes when
the thermometer is taking measurements.
15 EMISSIVITY DISPLAY shows the present emissivity setting
value. TIP: The symbol
means Emissivity.
16 BACKLIGHT INDICATOR appears when the backlight
function is active.
17 TEMPERATURE UNIT applies to both the main display and
the bottom display.
18 SYMBOLS used to indicate the kind of value being
displayed on the bottom display. EXAMPLE: If the symbol
“ MAX “ appears, the value on the bottom display is the
maximum value.
19 BOTTOM DISPLAY used to display maximum (MAX),
minimum (MIN), difference (DIF), average (AVG), high alarm
value (HAL) and low alarm value (LAL).
20
is the high alarm icon, and is low
alarm icon.
21 LOW BATTERY INDICATOR
: Replace the battery
immediately when the low battery indicator appears.
22 LASER FUNCTION INDICATOR appears when the laser
function is enabled. When this indicator appears, the laser
pointer will emit a laser beam when the trigger is pulled.
BUTTON INSTRUCTIONS (Figure A)
1 Button
Used to change temperature units from Celsius to
Fahrenheit value(s).
When setting emissivity (
), high alarm value (HAL),
or low alarm value (LAL), press this button to
increase the value to be set
2
Button
Press this button to turn on or off the backlight.
To enable or disable the laser function, press
button while pulling and holding the trigger. When the
laser function is enabled, the symbol appears.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stanley FMHT0-77422 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stanley FMHT0-77422 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 14,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info