611458
105
Verklein
Vergroot
Pagina terug
1/202
Pagina verder
4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
®
11.3 - 11.3 11.3: SOLO > AUTO CANCEL BEHAVIOUR
11.0: SOLO System
Solo Operation Logic
Activating Solos
A Solo is activated when any Solo/Sel switch on the console is pressed, as long as the following is true:
• Gang Mode is not active
• VCA or Mute Group Setup page is not open
• Input or Output Fader Page Setup page is not open
Clearing Solos
All active Solos can be cleared by pressing the momentary Solo Clear switch in the Master Section of the console.
This switch illuminates when any Solos are active.
• Solos can be switched off manually.
• Solos can be cleared by pressing other Solos, if AUTO CANCEL mode is enabled (see later in this chapter).
Input Priority Mode
When Input Priority is enabled, via the I/P PRI button in the master bay, it allows an Output Solo to remain active,
whilst an Input Solo is temporarily activated ‘over the top’ of it. When the Input Solo is activated, its audio replaces the
Output Solo audio on the Solo Bus, although the Output’s Solo/Sel switch remains illuminated. When the Input Solo is
deactivated, the Output Solo’s audio will return to the Solo Bus.
HINT: Input Priority mode is normally used by Monitor engineers, who tend to work with an Output Solo always active,
but occasionally need to solo an input to troubleshoot a problem. The Input Priority mode ensures that they automati-
cally return to the Output Solo they were listening to, after the Input Solo is deactivated.
Autocancel Mode
In the majority of cases in live sound mixing, only one channel is soloed at any time, so it has become common prac-
tice for solos to ‘autocancel’ so that pressing any solo cancels the previous one, and only one solo can be ON at any
time. This speeds up operation by eliminating the need to switch solos off before soloing the next channel. In some ap-
plications however, such as line checking, it is necessary to keep one channel soloed as a shout talkback feed whilst
soloing others, so additive solo is required in these cases. The {Autocancel} On/off switch in the Monitor Setup page
allows the behaviour to be set according to requirements. It is also possible to solo more than one channel or bus at a
time even if {Autocancel} mode is ON, this is achieved by holding down the rst solo whilst pressing the next. This kind
of additive solo is temporary however, and the next solo to be pressed will cancel all of the active solos.
Input priority and Autocancel mode work together if both enabled so that Output Solos cancel among themselves and
input solos cancel among themselves, but Input Solos do not cancel Output solos or vice versa.
Follow Output Solo Mode
A key feature of modern digital consoles is a method of assigning the channel faders to control Aux send levels for
monitor mixing. On the Vi3000, this mode is called ‘Follow’ mode, meaning that the Input faders will Follow the selec-
tion of the Output bus solo, which doubles as a bus select switch.
Follow mode is engaged using the distinctive, triangular Follow Output Solo [FLW] keys. There are three [FLW] keys:
one fader key and two Vistonics area keys. Only one key can be active at any one time (or none can be selected).
Selecting Follow mode for the Vistonics area means that a horizontal row of Vistonics encoders will be assigned
across the whole console to the contribution levels of the currently soloed bus. There is one [FLW] key for the upper
Vistonics row and one for the lower row. To use Follow mode on Vistonics area, the Vistonics screens must have all
processing views deselected.
• If Follow Solo is NOT active for faders or Vistonics encoders, pressing a Group or Aux Output Solo will activate an
105

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Soundcraft Vi 3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Soundcraft Vi 3000 in de taal/talen: Engels als bijlage per email.

De handleiding is 17,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info